The best type of weed eater trimmer line for cutting through tough vegetation is a heavy-duty, twisted or serrated line with a thicker diameter. These types of trimmer lines are more durable and can easily cut through dense and tough vegetation.
Nylon
The Weed Eater Electric Trimmer is one of the easiest to use
To restring a Ryobi Expand-It weed eater, first remove the spool from the trimmer head. Cut a length of new trimmer line, thread it through the eyelet holes on the spool, and wind it evenly in the direction indicated on the spool. Reattach the spool to the trimmer head and trim any excess line.
A line trimmer, also known as a string trimmer, is used to trim grass or weeds. The piece of equipment also goes by the name of a weed eater, or weed whacker.
To open the weed eater head to replace the trimmer line, first, locate the tabs on the side of the head. Press and hold these tabs while twisting the head counterclockwise to unlock it. Once unlocked, carefully remove the head to access the spool and replace the trimmer line.
0.080" per 1993 manual
The best type of string to use for a Kobalt weed eater is a high-quality, durable trimmer line that is compatible with the specific model of the weed eater.
To restring a Ryobi Expand-It weed eater, first remove the spool from the trimmer head. Cut a length of new trimmer line, usually around 10 feet. Insert the line into the spool following the arrows for the correct winding direction. Secure the line in the notches on the spool and reassemble the spool onto the trimmer head.
The Weed Eater brand of trimmers have very few spool tangles
Wolf (flesh eater) rather than rabbit (vegetation eater).
To put a new line on an 11-inch electric weed eater trimmer, first, unplug the trimmer for safety. Remove the spool cap by pressing the tabs and lifting it off. Take the new line, cut a length (usually around 10-15 feet), and insert one end through the eyelet in the spool, winding it in the direction indicated by the arrows on the spool until it’s filled. Finally, reattach the spool, ensuring the line is threaded through the exit holes, and replace the spool cap.
To properly string a weed eater, first, turn off the engine and disconnect the spark plug. Then, remove the spool from the trimmer head and unwind any remaining old string. Cut a new piece of trimmer line to the recommended length and insert it into the spool, following the directional arrows. Finally, reassemble the spool onto the trimmer head and secure it in place.