The standard TV mounting bolt size for most television sets is M8, which means the bolt has an 8mm diameter.
When choosing a bolt for a TV mount, look for one that is the same size as the mounting holes on the back of your TV. Typically, a 6mm or 8mm bolt is commonly used for most TV mounts. Be sure to check the specifications of your specific TV mount to ensure you are using the correct size bolt.
Most backboard-to-support bolt patterns SEEM to be 35" w x 20"h
The standard tripod mounting screw size for most cameras is 1/4 inch.
The standard bicycle crank bolt size for most bikes is 14mm.
Virtually all televisions today have a removable base. Most bases use a non-standard mounting system so you will need to read the manual to confirm the removal method. Similarly, virtually all have a "VESA" standard mount on the rear of the case to allow a wall mount to be fitted. There are several different sizes of VESA mount so it is important that you read the manual to find out which size is needed. The VESA standard mounting system uses 4 screws in a square shape so it is easy to recognize in the rear of the television.
The standard camera screw size used for mounting accessories on most DSLR cameras is 1/4"-20.
The standard bike pedal bolt size for most bicycles is 9/16 inch.
The standard tripod bolt size for most camera tripods is 1/4 inch.
Most TV brackets are screwed to the wall.
The standard m5 bolt diameter used in most industrial applications is 5 millimeters.
Flat Display Mounting Interface (FDMI) is a standard for mounting flat panel monitors and TVs. This is correctly known as FDMI, but more often referred to as "VESA mount". The interface is implemented on most modern flat-panel monitors and TVs, but not all.Sub-Standards * MIS-D 75 = Mounting holes are in a 75mm x 75mm pattern. * MIS-D 100 = Mounting holes are in a 100mm x 100mm pattern. * MIS-E = Mounting holes are in a 200mm x 100mm pattern. * MIS-F = Multiple holes are spaced so that mounting points may be at: ** 200mm x 200mm ** 400mm x 400mm ** 600mm x 200mm ** 600mm x 400mm ** 800mm x 400mm
The standard toilet bolt size for most toilets is 5/16 inch in diameter and 3.5 inches in length.