answersLogoWhite

0

If your plug socket is not working, first try plugging in a different device to see if the issue is with the socket or the device. If the socket still doesn't work, check the circuit breaker to see if it has tripped. If the circuit breaker is fine, it may be a wiring issue and you should contact a qualified electrician to inspect and repair the socket.

User Avatar

AnswerBot

6mo ago

What else can I help you with?

Related Questions

Who was the plug socket invented by and when?

lee gough invented the plug socket back in 1988 whilst working on another invention later known as the soda stream.


What size socket should you use for spark plugs for your 88 crown Victoria?

Should be a 5/8 spark plug socket.


What size socket for an autolite plug 392u?

The Autolite 3924 spark plug typically requires a 5/8-inch (16mm) socket for installation and removal. It's important to use a spark plug socket that has a rubber insert or magnetic tip to help hold the plug securely while working. Always ensure the socket is compatible with your ratchet or wrench for proper leverage.


What is CB if P is 5?

126.5that should be the socket where you plug in the mike.


Why should you not poke things into a plug socket?

It could electrocute you!


Radiator fan not working on 1996 Honda Accord?

Make sure the cord is plug into the wall socket.


Why should never place a metal in a plug socket?

it is a fatal risk of getting electrocuted if you insert any metal piece into a plug socket. Hence do not put any metal in to plug socket


What size socket should you use on a 206 spark plug?

size 20


How do you get socket out of spark plug sleeve as its stuck right above the plug?

Penetrating Oil a good brand like GUNK! Spray that down the sleeve and it should lubricate the socket enough to release it.


You broke a plug trying to remove it what is the best way to get it out?

Usually if you break a plug it is only the top white ceramic part. The only time this would be a problem is if your plugs are in the top of the head and down in a hole. They do make needle nose pliers long enough to reach down and get the plug. The ceramic part should have come out with the socket if using a regular spark plug socket. That would leave just the base. Take the socket and put a piece of tape on the inside of the socket on each face. Bring it out over the edge of the socket and onto the outside. This will make the socket enough smaller that it should hold on to the base of the spark plug so you can get it out.


How do you drain the transmission fluid on a 1998 Avalon you believe you need a 10cm or 11 cm hex wrench to fit the drain plug but you are not sure?

You can use a 11 centimeter socket to remove the transmission drain plug. The socket should be a five-point socket.


What is the common way of referring to a plug and its corresponding socket as per the electrical engineering terminology?

Plug and socket, plug and socket outlet, plug and receptacle or plain plug and outlet all seem to be in common usage in the US. Plug and socket is possibly the only wording commonly used in the UK. [Plug and socket outlet sounds ok to a me, as a Brit, but we never really use that expression in the UK. Plug and outlet or plug and receptacle actually sound very strange!]