0
What else can I help you with?
What is full form of RG11?
The full form of RG11 is "Radio Guide 11." It typically refers to a type of coaxial cable used in radio frequency applications, particularly in television and telecommunications. RG11 cables have a larger diameter compared to RG6 cables, allowing for lower signal loss over longer distances. They are commonly used for cable television, satellite, and internet installations.
DB Loss for splicing RG11 cable?
DB loss for splicing RG11 cable typically ranges from 0.1 to 0.5 dB per splice, depending on the quality of the splice and the techniques used. RG11 cable, known for its low attenuation characteristics, is often used in long-distance applications, making splice loss a critical factor. Ensuring proper alignment and using high-quality connectors can minimize loss during splicing. Regular testing and maintenance can also help maintain optimal performance.
What are the differences between RG11 and RG6 cables, and which one is more suitable for high-speed data transmission?
RG11 cables are thicker and have lower signal loss compared to RG6 cables. RG11 cables are more suitable for high-speed data transmission because they can carry signals over longer distances without losing quality.
What are the differences between RG6 and RG11 cables and which one is more suitable for my specific needs?
RG6 and RG11 cables differ in terms of their size, signal carrying capacity, and maximum transmission distance. RG6 cables are smaller in diameter and are suitable for shorter distances, while RG11 cables are larger and can carry signals over longer distances with less signal loss. If you need to transmit signals over a longer distance, RG11 cables would be more suitable for your needs. However, if you are working with shorter distances, RG6 cables may be sufficient.
What is the difference between rg6 and rg11?
http://wiki.answers.com/Q/What_is_the_difference_between_rg6_and_rg11"
What is the maximum length for RG11 coax cable before significant degradation of signal?
The maximum length for RG11 coax cable before significant signal degradation typically ranges up to 500 feet (about 152 meters) for standard applications. Beyond this distance, attenuation increases, leading to a noticeable loss in signal quality. For optimal performance, it's often recommended to keep the length under 300 feet (about 91 meters) when possible, especially for high-frequency signals. Additionally, the specific application and frequency can also influence the effective distance.
What are the basic differences between cable and satellite TV technology?
satellite cables and TV cables are the same to a point. the difference in the too are is the TV cable a RG59 or a RG6 RG59 will not work with satellite because if the smaller center conductor with satellite it pushes power were it will end up destroying the center conductor RG6 witch is in newer homes is ideal for both satellite and cable RG11 is used with TV cable from usual the box / tap outside to houses usually running over 300 ft depending on the DB coming from the starting location
What kind of cabling does VoIP use?
VoIP cables are RG11 for phones lines and UTP RG45 for internet connection.
You would like to rewire your house with rg11 cable Will this cable fit the back of a tv cable box etc?
Go ahead and re-wire away! Your biggest problem might be in finding end connectors that'll fit the RG-11. Otherwise, it's 75 ohm cable and compatible. dude rg-11 is way over kill that is primarily used for drops that are over 200 feet long.you would be fine just using rg-6 cable because it would be alot eaier to use behind your wall plates.
