The arrow on the air filter should point towards the direction of the airflow when installing it in the furnace.
The furnace filter arrow should point towards the direction of the airflow.
The arrow on a furnace filter points in the direction of airflow.
The arrow on a furnace filter should point towards the direction of airflow for optimal performance.
The arrow on the furnace filter should point towards the direction of airflow for optimal performance.
Toward the direction of the air flow. In other words the air is being drawn into the furnace so the arrow should point at the furnace.
The arrow on the filter should point toward the furnace/airhandler, whichever you have, or in other words with the direction of the airflow.
If you look closely at the filter there should be an arrow and on most the word flow next to the arrow. The arrow should point to the engine and away from the gas tank. the arrow should point to the front.
Yes, there should be an arrow with the words " flow " stamped on the filter.
In line filters are directional. check that filter was not installed backwards look for arrow on the side of filter. arrow should point towards engine an away from fuel tank
Slide the clamps down. pull the fuel filter off the hoses. Put the new one on. And look for for the arrow on the side of the fuel filter. The arrow is to show you which way the fuel is going. It comes from the fuel tank, and goes TO the engine. Point the arrow going to the engine.
The arrow for micron-air cabin filter points in the downward direction. This will allow the glove compartment to open downwards without causing any destruction.Ê
if you have fuel to the filter but not beyond then obviously something is wrong with the filter. either it is clogged, which case its simply a matter of replacing it, or you have your filter installed in the wrong direction...yes there is a correct flow direction. there should be and arrow which would indicate the low direction. in any event the arrow should point toward the motor.