0
What else can I help you with?
What is different between spur gear and worm gear?
Spur gears give 180 degree drive, and worm gears give 90 degree drive.
What type of gear is a combination of a gear combined with threads of a screw?
A worm drive.
If you have a worm gear and a sprocket gear and the worm gear rotates slowly on its shaft how will the sprocket gear turn?
Even slower
State no of chain used in differential pulley block and worm geared pulley block?
A differential pulley block typically uses two chains to facilitate the lifting mechanism, allowing for a significant mechanical advantage. In contrast, a worm geared pulley block generally employs a single chain that interacts with a worm gear for precise control and lifting. Both systems are designed to enhance lifting efficiency but operate through different mechanical principles.
What is lead in gear?
linear distance moved by the gear(worm,screw jack) for one rotation of the gear(worm,screw jack)
Is worm and wheel reversible?
yes you can reverse worm and gear. A worm gear can rotate the worm, its based on the lead angle, pressure angle and co.efficient of friction between the pairs.
Which gear is used for perpendicular shaft?
Worm gear
What tipe of gears are on a bicycle a spur gear a bevel gear a worm gear?
Depends. Bicycles with external gears have chain-and-sprocket gears. Bicycles with internally geared hubs have both a chain-and-sprocket gear and spur gears (usually in a planetary configuration) inside the rear hub. Then there are the rather rare shaft-drive bicycles, which use bevel gears. And maybe an internally geared hub as well. Then there's the occasional belt drive bike of course. And one or two CVT designs.
What is the function of the worm?
function , purpose , advantage and disadvantage of worm gear
What is the function of a worm gear?
In worm gears, an axle or shafts has a screw that connects with another gear. This system is used when you need to change the direction of motion and reduce speed
What is the working principle of worm gears in sand mullers?
Sand mullers break up sand after it has been used in molds to facilitate sandcasting. By effectively breaking up the sand, it can be reused. The worm on a motor or on the "driven" side of the device will engage with a worm gear. The worm rotates continuously, and the spiral cut gears "worm" their way "along" the axis of the gear. The worm gear (or spur gear) engages with the worm and rotates continuously as well. Also, the worm gear will translate the rotary motion of the worm by 90 degrees. It is fairly easy to see how the unit works if you look at some pictures or drawings. Hey, how about some animation or video? Got a couple of links.
What is difference between bevel gear and worm wheel?
A bevel gear is cone shaped with the gear teeth placed vertically along the periphery. A worm gear is barrel shaped with the teeth spiraling along the length like a screw.
