Depends rather on what the particular key is designed to do. Switch some equipment, car, torch etc on and off. Some equipment may not like this, because of a power surge each time it is switched on, so it might break down (fail).
With a scan tool, or by turning the key on, off, on, off, on and watching the odometer display.With a scan tool, or by turning the key on, off, on, off, on and watching the odometer display.
yes, it's correct.
Umm...you might want to try turning the key counter-clockwise (toward you) while the car is in park. Then pull the key out of the ignition. This is the basic method of turning all vehicles off.
turn key off and on several times, while turning on wait for fuel pump to kick on the off, turn key off repeat.
Yes, try turning the key on, off, on, off, on and counting the blinks of the check engine light.If that does not work an OBD 1 scan tool is required.Yes, try turning the key on, off, on, off, on and counting the blinks of the check engine light.If that does not work an OBD 1 scan tool is required.
By turning the key to the off position, you are simply grounding out the ignition
Your diesel vehicle might keep running after turning off the key because there is still enough fuel in the system to allow it to idle. In many diesel vehicles, the engine is stopped by choking the fuel.
Either with a scan tool or by turning key on,off,on,off,on and counting the blinks.
To shut off the alarm on a 2004 Subaru Outback, you can typically press the unlock button on your key fob. If you don't have the key fob, inserting the key into the driver's door and turning it to unlock should also deactivate the alarm. If the alarm continues to sound, turning the ignition on and off may help reset it.
I have a 1984 Corvette and the alarm went off. Is there a switch, key or button that I can turn the alarm off? Thank you! The alarm is reset by inserting the door key into the drivers door and turning the key.
A malfunctioning the ignition switch will allow the car to keep running after the key is turned off. You can remove the positive ground cable from the battery to shut the car off.
Try pulling one way or the other on the steering wheel while turning key. Sometimes if wheels aren't straight when you shut the car off, the wheel locks with pressure on pin preventing key from turning.