0
What else can I help you with?
Why torque and then back off and then re torque metal head gasket?
That method results in a more accurate and even torque.
RPMs in a cadillac go up and down at high speed?
Your car most likely has an automatic transmission. If you're noticing the rpms going up and down it is because your automatic transmission is using its torque converter. it uses the torque converter to get the transmission up to speed with the engine and then it locks but when the torque gets to be too much for the engine it unlocks and speeds back up again.
How do you put a torque converter in th350 Chevy?
I assume you have the transmission out of the car. It has to be out to replace the torque converter. The old torque converter will just pull off, but you may have to spin it back and forth a couple of times. When you install the new one, slide it on the shaft and spin it back and forth while pushing it towards the transmission and it will slide back towards the transmission. You have to do this again, because it has two sets of gears that it has to engage. If it doesn,t slide back twice, you will never get the transmission to slide up to the motor correctly. You may get bolts in it, but you will break something trying to tighten the bolts. If the transmission does not slide up to the motor without a lot of force, you do not have the torque converter on all the way. If it does, you should be able to bolt the transmission to the engine fairly easily. Once the transmission is bolted up correctly, you can turn the flywheel to line up the three bolts that hold the torque converter to the flywheel. Make sure you torque the flywheel to converter bolts to the specified torque settings, and they will vary according to the specific transmission, usually around 45 FT LBS.
What is mean by back up torque and when it applies?
Torque backup is generally applicable to low speed diesel engines which are primarily used for high torque applications like tractors and off highway vehicles. Generally torque backup is expressed in percentage Torque backup = (max Torque - rated speed torque)/rated speed torque in % This generally means how much the engine can be loaded when its rpm drops to max torque rpm. Usually all OEM try to give maximum backup torque from their engines. But it is limited by volumetric efficiency at lower rpm for NA engines and for TC engines it can be more.
How do you get an account on project torque?
you can get an account on project torque by joining up with aeriagames.com
What would cause a 2001 4runner to stall when slowing or stopping only to start right back up and stall out when put back in gear?
your torque converter has locked up.... it's like having a manual transmission with no clutch.
What is net torque?
Net torque is the magnitude and direction of torque that is left over when you add up the torques that are acting on an object.
Why controlling torque is necessary in analog indicating instruments?
so that when damping torque=controlling torque,the pointer comes back to the zero position...i.e. the main role of controlling torque is to ensure to bring the pointer to the 0 position when deflecting torque is removed
What is motrcycle torque?
The amount of turning force at the back wheel
How do you line up Altima fly wheel and torque converter?
Well, first of all the torque converter has two slots that will need to line up exactly with input shaft. However, the inner splines that are connected to the torque converter should be lined up with the splines of the torque converter of the input shaft.
Can 10kg with a normal torque caused by gravitation lift up 5kg with a greater torque?
yes
Will a torque converter from a THM 350 fit 4l80e trans?
NO... You must put a 4L80E lock up converter back in it. If you don't you will have all kinds of trouble.
