0
What else can I help you with?
What precautions should a driver take at uncontrolled intersections?
When approaching an intersection of this type, you shall yield the right-of-way to any vehicle which has entered the intersection on your right or is approaching the intersection from your right. If the road to your right is clear, or if approaching vehicles are far enough from the intersection to make your crossing safe, you may proceed. Since there are no traffic controls at this intersection, make sure that there are no approaching vehicles from the left. you may legally have the right-of-way, but you should be sur the other driver yield to you before you proceed. [4-2] Look this up!!! :)
How many mph should you not exceed when at a blind intersection?
15mph
What is the proper procedure to follow when approaching an intersection where there are no signs or traffic lights?
When approaching an intersection with no signs or traffic lights, you should treat it as a four-way stop. This means coming to a complete stop and yielding to any vehicles that arrived before you. Proceed through the intersection in the order that vehicles arrived.
What should drivers do when two cars reach an uncontrolled intersection at about the same time?
When two cars reach an uncontrolled intersection at about the same time, drivers should yield to the vehicle on their right. This means allowing the car on the right to proceed first before entering the intersection. It is important to exercise caution and communicate with other drivers to avoid accidents.
When approaching an intersection without traffic lights one should treat it as?
When approaching an intersection without traffic lights, one should treat it as a yield intersection, giving priority to vehicles already in the intersection and following the right-of-way rules. Drivers should slow down, look for oncoming traffic, and be prepared to stop if necessary. Additionally, ensure to check for pedestrians and cyclists before proceeding through the intersection. Always prioritize safety and caution in such scenarios.
What are the rules for approaching a 4-way intersection with 2 stop signs?
When approaching a 4-way intersection with 2 stop signs, the rule is to come to a complete stop and yield the right of way to any vehicles that arrived before you. After stopping, proceed through the intersection in the order that vehicles arrived at the stop signs. It is important to be cautious and alert to avoid accidents.
When approaching a railroad intersection the best defense is to?
When approaching a railroad intersection, the best defense is to always be alert and aware of your surroundings. Look for warning signs, signals, and flashing lights indicating an approaching train. Slow down, and if necessary, stop at the designated stopping point to ensure it's safe to cross. Never attempt to cross the tracks if a train is approaching, and wait until it has completely passed before proceeding.
What are the rules and regulations to follow when approaching a two-way intersection?
When approaching a two-way intersection, you should follow these rules and regulations: come to a complete stop at a stop sign, yield to oncoming traffic if there is no stop sign, obey traffic signals, and yield to pedestrians in crosswalks. Make sure to look both ways before proceeding through the intersection to ensure it is safe to do so.
When approaching a stop sign where there is no stop line sidewalk or crosswalk you should?
Stop just before you enter the intersection.
What is the maximum speed limit before a blind intersection in California?
In California, the last 100 feet before an uncontrolled (no traffic signal) intersection must be travelled at a speed no greater than 15 mph if the driver does not have a clear, unobstructed view of the other vehicles at or approaching the intersection. Where a signal is used, this does not apply.
When approaching an intersection you should?
When approaching an intersection, you should reduce your speed and be prepared to stop if necessary. Always look for traffic signals and signs, and yield to pedestrians and other vehicles as required. Ensure you check both directions for oncoming traffic before proceeding, especially if making a turn. Stay alert for any unexpected hazards or changes in traffic conditions.
When approaching an intersection bridge or railroad crossing you should When approaching an intersection bridge or railroad crossing you should never drive (pass) on the left half of the roadway when?
When approaching an intersection, bridge, or railroad crossing, you should never drive on the left half of the roadway when it is marked with solid lines or when visibility is limited. Additionally, avoid passing other vehicles in these areas as it can create dangerous situations due to the potential for oncoming traffic or obstacles. Always ensure you have a clear view and the right of way before proceeding. Safety should be your primary concern in these scenarios.
