answersLogoWhite

0

in a typical residential split system, the condenser fan is cooling the compressor so i wouldn't expect the same useful life from the compressor if it were not being cooled. you could set up its own fan i suppose. you can separate the evaporator and condenser about 25' (50' total line circuit) off the shelf. farther than that, the manufacturer usually has a larger line set (diameters) to keep the same performance rating. you also get into oil drainback issues, i.e. you have to pay attention in sloping the lineset to drain oil back to the compressor.

User Avatar

Wiki User

19y ago

What else can I help you with?

Related Questions

What are the components of car ac?

Condenser, Evaporator,Compressor,Accumlator


Where does the pressure in a refrigeration system change?

The pressure in a refrigeration system changes in the compressor, condenser, expansion valve, and evaporator. In the compressor, the pressure increases, while in the condenser, it remains high before decreasing in the expansion valve and evaporator.


4 major components of refrigeration and airconditioning?

Compressor, Condenser, Meter Device and Evaporator


What are the components of refrigirator?

The main components of a refrigerator are a compressor, condenser coils, evaporator coils, and a refrigerant. The compressor circulates the refrigerant, which absorbs heat from inside the refrigerator and releases it outside through the condenser coils. The evaporator coils then cool the air inside the refrigerator.


Can you install a 3.5 ton condenser on a 3 ton evaporator?

Installing a 3 1/2 ton condenser on a 3 tr evaporator will not function properly. There isn't enough evaporator coil surface area to absorb heat and vaporize refrigerant liquid for its return back to the condenser compressor. What can be done is a 3 ton condenser unit with a 3 1/2 evaporator coil.


What are the main components of an air conditioner?

The main components of an air conditioner are the compressor, condenser, evaporator, and expansion valve. The compressor pressurizes the refrigerant gas, the condenser releases heat from the gas, the evaporator cools the air by absorbing heat, and the expansion valve regulates the flow of the refrigerant.


What role does a compessor play in a refrigeration system?

In vapour compressor refrigeration system the low pressure and temperature vapour refrigerant from evaporator is compressed. where it is compressed to a high pressure and temperature. From compressor refrigerant goes to condenser where where it changes the phase. from condenser refrigerant goes to evaporator through expansion device.


What is an evaporator solenoid and what does it do?

It is a device that cycles the compressor depending on the line pressure coming out of the evaporator. Some vehicles have the switch located over on the high "condenser" side of the system.


How do you drain AC oil?

To drain the compressor you have to remove the compressor from where it is mounted and physically drain the oil from it. From the lines, condenser and evaporator you have to isolate each item and use a flush kit available at your local auto parts store. It is nearly impossible to completely remove all the oil and trash from the evaporator and the condenser.


What are components parts of refrigeration?

There are four main parts of refrigerator. A compressor A condenser A Metering Device(capillary tube) An Evaporator


Equalizing lines should be located in multiple condenser and compressor applications where Between condenser and evaporator coils or Near the TXV or Between compressors and condensers or None of them?

oppisite side of txv sensing bulb on outlet of evaporator (suction line)


Which item is not a part of the AC system compressor condenser evaporator radiator?

Radiator is not a part of the AC system; it is part of the vehicle's cooling system, which helps to cool the engine by dissipating heat. The AC system consists of the compressor, condenser, and evaporator, which work together to cool and circulate air inside the vehicle.