0
No, you cannot use a 12V 0.6A (7.2W) adapter instead of a 12V 1.5A adapter. The 0.6A adapter provides insufficient current for devices that require 1.5A, potentially leading to underperformance or damage to the device due to inadequate power supply. Always match the voltage and ensure the current rating of the adapter meets or exceeds the device's requirements.
What else can I help you with?
Can you put 12V 50W light to 12v ac 2A adaptor?
No, you should not connect a 12V 50W light directly to a 12V AC 2A adaptor. The light requires a higher wattage than the adaptor can provide, which can damage both the light and the adaptor. You should use an adaptor that can supply the correct voltage and wattage for the light.
For a device requireing 12v 1.5A will a DC adaptor output 12v 2A also work for this device?
Yes, a DC adaptor outputting 12V and 2A will work for a device that requires 12V and 1.5A. The adaptor can provide up to 2A, which means it can supply the necessary current without overloading. Just ensure that the voltage matches (12V) and the polarity is correct for safe operation.
Can you replace 12v 1a adaptor used on device of 12v 700ma?
No, the new adapter will not be able to safely supply enough current.
What is the size of the ac adaptor for a fiber optic tree?
input 230-240v output 12v-55va
What will happen if use a 12v 400ma instead of 12v 500ma?
i am not sure, BUT according to the answer in this post:Can_you_use_a_9V_600mA_adapter_on_a_9V_400ma_scanneryou need an adaptor of 9v and AT LEAST 500mA (assuming that the appliance draws 500mA)
Can a 9 volt adaptor be used on a appliance that calls for 9volt battery or 12volt adaptor?
No. The person who designed your appliance had a 12v adapter, so when he designed the adapter connector he put a resistor in it to drop the voltage to 9v.
Can you use a 12v 500mA switching adapter going to a 12v 700mA security camera?
If the camera actually uses 700 mA in order to do its job, then the 500 mA adaptor will warm up, then overheat, and eventually fail.
Where can you get a Pyramat S2500W Wireless Sound Rocker power cord?
Could someone please tell me what adaptor I will need to buy for my S2500W Wirelss Sound Rocker. It say 12V AC but I do not know the apms. Also where do I purchase this adaptor. Please help
Can 9V 1A router adaptor be used for 12V router adaptor?
No, a 9V 1A router adapter cannot be used for a 12V router. The voltage rating is critical, and using a lower voltage can lead to insufficient power supply, potentially causing the router to malfunction. Additionally, the 1A current rating may not meet the power requirements of the 12V router, risking damage to the device. Always use an adapter that matches the specified voltage and current ratings for optimal performance and safety.
How does a 6volt relay circuit works?
The same as a 12V relay circuit, except it only needs 6V instead of 12V.
Can I replace a 12volt dc 2amp adaptor with a 12volt 1.5 dc adaptor?
by definition the wattage is the criteria 12v x 2amps=24 watts If the circuit in question needs 2 amperes then an exactreplacement mandatory, however if the circuit in question only draws 1.5 amps then it is realistic possible
What if you use a 20V adaptor for a 12V machine?
Using a 20V adapter for a 12V machine can potentially damage the machine due to overvoltage. The machine might not be able to handle the higher voltage, leading to malfunctions or even permanent damage. It is important to use the correct voltage adapter to ensure the proper functioning and safety of the machine.
