Start guessing.
Most cheap locks aren't that sensitive, so you don't have to try every number. The sort used in school lockers will probably open if you're within 3 of the correct value, so you can try every fifth number. Of course, if it's a school locker, you could just go to the office and get the combination again; they record this sort of thing.
you dont
My brinks locked in the open position. What do I need to do to get it fixed
you cant you need to know the combo and have the lock open to access the combination change device if there was a way to reset a combo on a locked lock what kind of security would that be?
Start praying that you remember the combo.
show a travelpro three number lock.I've lost the combo and can't get it open.
Possibly with a chisel and sledgehammer, but they are designed to not open without the correct code.
Hold down the silver button on the side. Scroll through the far right wheel until you hear a click. Do the same for the middle and left wheels. Hope it helped! (Worked for me) Update: Use your thumb to hold down the silver button on the side. With your thumb, you can feel the button "fall" or "bump" into place as you turn the wheel to the correct digit. This usually works really well on the 3rd digit. This at least narrows it down to 100 possible combinations (rather than the original 1,000). Or, knowing the last digit may help jog your memory to remember the combination you set in the first place.
To close a Brinks resettable combo lock, first ensure that the lock is in the open position by aligning the correct combination on the dials and pulling up the shank. Once open, simply push the shank back down into the lock body until it clicks into place, securing it. Make sure to scramble the dials to lock it and prevent unauthorized access. Always double-check that the lock is fully engaged before leaving it unattended.
a lock that is sturdy and not easy to open get a dudley lock they are very hard and sturdy and dont break very easily.
The lock has to be open, turn the lock to the back side, flip the lever on the bottom up and to the left, set the new combo, push the lever on the back to the right and your done.
The TSA is not authorized to open locks to reset combinations. If you forget the combination to a TSA-approved lock, the best solution is to use the manufacturer’s instructions for resetting the lock, if applicable. Alternatively, you may need to cut the lock or seek assistance from a locksmith to remove it without damaging your luggage.
To reset a Lewis N. Clark 3-dial TSA002 combo lock, do the following: 1) Position the lock so if you're looking straight at it, the lock is set on it's large flat side, with the combo numbers on the right side and the n-shaped clasp open on the left. 2) Pull the clasp straight up and rotate it counter clockwise 180 degrees and press it down. 3) While holding the clasp down at the 180 degree location, dial in your new combo. 4) After the new combo is set, release the downward pressure on the clasp, continue rotating it counter clockwise to the lock position and you're done.