By the number of suface area square feet. Check with the local Building Dept. for specs.
If this pool is indoors consult your local fire marshal for the restrictions on the building occupancy level
To calculate the occupant load in a pool in Oklahoma, you typically use the formula based on the pool's surface area. The Oklahoma Administrative Code specifies that the occupant load for swimming pools is determined by dividing the total area of the pool (in square feet) by a factor of 15 square feet per person for recreational pools. For areas like diving pools or water slides, different factors may apply. Always refer to local building codes and regulations for specific guidelines.
If you mean the maximum occupancy of a room, then several things are considered. The square footage of the room, the room's purpose, and the number of emergency exits that exist are factored in.
no load voltage - full load voltage by full load voltage
There are several ways to calculate working load limit. One of these includes Minimum Breaking Load (MBL) divided by Working Load Limit (WLL) equals Working Load Limit (WLL).
dead load and live load dead load is the load of weight that is on the floor that is part of the construction of the house live load is the weight you add to it as in people furniture etc,
lolz
You mean heat load? Use Manual J.
To calculate the DG set current, you need the load current and the load voltage. To convert it into kilowatts it is divided by 1000.
To calculate the safe working load of a ship's bollard, you need the working stress and the force applied. These two will help you compute the safe working load.
stress is the ratio between the load and area