Assuming it has 4 numbers, start with 9999 then 9998 then 9997 etc until you reach 0000. You will hit the combination at some point in the sequence,
The best way to open a combination lock is to enter the combination. If this isn't possible, a hacksaw or bolt cutter may do the trick.
In order to open any combination lock you need to know the correct combination, set each wheel of the lock so that the correct combination of numbers are visible in a line and the lock will then pop open when triggered.
In order to open any combination lock you need to know the correct combination, set each wheel of the lock so that the correct combination of numbers are visible in a line and the lock will then pop open when triggered.
To open a Samsonite suitcase with a 3-digit combination lock, first ensure the lock is set to the default combination, usually 000. If you don’t know the combination, you may need to try all possible combinations or contact Samsonite for assistance. For the correct combination, turn the dials to the numbers in the specified order and pull up the lock mechanism. Make sure to align the dials correctly to unlock the case.
Yes, HOWEVER- if it is locked, and TSA needs to inspect the inside of the luggage, they CAN break it open. You should leave it unlocked.
To open a combination lock on a Samsonite briefcase, first locate the dials and ensure they are set to the correct combination. If you don't know the combination, you may need to contact Samsonite customer service for assistance or refer to the briefcase's manual if available. If it's a resettable lock and you’ve forgotten the combination, look for a reset mechanism, which may require a specific tool or method to change the code. Always be cautious not to force the lock, as this could damage it.
To open a Samsonite lock TSA007, first set the dials to the default combination (0-0-0). Then, locate the reset button on the side of the lock and press it with a pen or similar tool. While holding the reset button down, set your desired combination on the dials. Release the reset button and your new combination should be set. Turn the dials to your new combination and the lock should open.
The American Tourister Suitcase is made by Samsonite. It has a lock that consists of three dials, that form a combination chosen by the owner. If the owner forgets the combination, he can try to pick it open with a safety pin (one can find instructions for this on the Internet) or take it to a Samsonite Repair Center.
To reset or open the lock on a hardshell Samsonite suitcase, first check for a reset button or a small hole on the lock, which may allow you to set a new combination. If you can't find one, refer to the Samsonite website for guidance specific to your model or contact their customer service for assistance. Additionally, you might consider visiting a locksmith for professional help if the lock remains unresponsive.
Use the key provided
To open a Samsonite combination lock without the combination, you can try the following method: Gently pull up on the latch while simultaneously turning the dial slowly to feel for any resistance or clicks. This may help you identify the correct combination through trial and error. Alternatively, you can use a shim or thin piece of metal to bypass the locking mechanism, but this method may damage the lock. If these methods fail, consider contacting a locksmith or Samsonite customer service for assistance.
The Samsonite Aeris suitcase does not come with a standard lock and key. You must use a code to open it with. The code usually comes with the suitcase when it is purchased.