With a key.
To reset or put in a custom code for your TSA suitcase lock follow these instructions. Set the lock to the default code of 000; use a sharp item to press the reset button in do this until you hear a click. Set your own custom code, pull the catch out as if to open the suitcase lock until you hear another click, your custom lock combination is now set.
How to reset the number??
With the briefcase that I have, I had to put in the unlock combination. Then hold down the unlock button or latch and while holding it down change the combination. Once you release the latch or button the combination will have changed. Try out the new combination to verify.
The old fashioned way, a hammer and nail. Put the nail between the lock and the suitcase and hammer it in until it breaks the lock off.
There is no way to unlock an IKEA Gallant combination lock without the actual combination. The combinations are preset prior to purchasing the lock.
You search for the combination at the school , and you go to the lock and unlock .
1. Look for a small recessed button below (on the bottom side) the TSA key access. 2. Push in the button with a paper clip or pen. 3. While the button is pushed, change the combination to the desired numbers. 4. Then release the button and the combination has been reset.
With the combination
In order to open any combination lock you need to know the correct combination, set each wheel of the lock so that the correct combination of numbers are visible in a line and the lock will then pop open when triggered.
In order to open any combination lock you need to know the correct combination, set each wheel of the lock so that the correct combination of numbers are visible in a line and the lock will then pop open when triggered.
Use a pistol, hold with bith hands ,aim at lock ,then shoot. Good luck!
You enter the correct combination for the lock then move the catch and the lock will spring open.