Your black wires are your hot wires. The white is your neutral or common. It would be best to run an equipment ground (green wire) too.
I bought a 02 sensor but i have to wire it up. But there is 1 problem the new 1 has 2 white wire 1 black 1 grey. the old sensor 2 black 1 green and 1 white
This question isn't clear.
To wire a light and switch using 2-wire Romex, connect the black wire to the brass screw on the switch, the white wire to the light fixture, and the white wire to the silver screw on the switch. Make sure to cap the unused wire at both ends for safety. Be sure to turn off the power before starting and consult a professional if you are unsure.
BLACK WIRES=HEATER CIRCUIT WHITE WIRE=SENSOR GROUND BLUE WIRE=SENSOR PLUS VOLVOKAHUNA.COM
Radio Constant 12V+ Wire: Yellow/White Radio Switched 12V+ Wire: White/Red Radio Ground Wire: Black Radio Illumination Wire: Red/Black Radio Dimmer Wire: n/a Radio Antenna Trigger Wire: Yellow/White Radio Antenna Location: Left Rear Front Speakers Size and Location: 5 1/4? Doors Left Front Speaker Wire (+): Blue/Green Left Front Speaker Wire (-): Gray/Black Right Front Speaker Wire (+): Red/Green Right Front Speaker Wire (-): Brown/Black Rear Speakers Size and Location: 6 1/2? Rear Deck Left Rear Speaker Wire (+): Blue/Yellow Left Rear Speaker Wire (-): Gray/White Right Rear Speaker Wire (+): Red/Yellow Right Rear Speaker Wire (-): Brown/White
You would wire the switch to the first light. Code says to break the black or power side of the circuit. Connect the white to the light. Take the black down to the switch on the black wire and back to the light on the white. This is a line of wire from the light to the switch. From the first light, take the white and the return white from the switch to the second with another run of wire. This will be regular black white with ground. White to white and at the first light the return line from the switch is white but hook to the black to the second light. Second light to third just continues the two wires. Black to black, white to white. I think this is clear enough to follow. If not, ask again.
3 OR 4 . you only need 2 wires for 220, 1 phase is 120v between 2 of them its 220v . you also should have a ground for the third wire ,and the newer stuff requires a neutral or white wire for the 4th wire. hope i helped , D
Radio Constant 12V+ Wire: Yellow/White Radio Switched 12V+ Wire: White/Red Radio Ground Wire: Black Radio Illumination Wire: Red/Black Radio Dimmer Wire: n/a Radio Antenna Trigger Wire: Yellow/White Radio Antenna Location: Left Rear Front Speakers Size and Location: 5 1/4″ Doors Left Front Speaker Wire (+): Blue/Green Left Front Speaker Wire (-): Gray/Black Right Front Speaker Wire (+): Red/Green Right Front Speaker Wire (-): Brown/Black Rear Speakers Size and Location: 6 1/2″ Rear Deck Left Rear Speaker Wire (+): Blue/Yellow Left Rear Speaker Wire (-): Gray/White Right Rear Speaker Wire (+): Red/Yellow Right Rear Speaker Wire (-): Brown/White
it does,nt matter when you connect them if the curcuit blows/breaker trips you.ll know they are on backwards.black to black white to white you got light .green is ground.silver screw is white wire brass screw is black wire.if you peel back a little further and look closer you will see the fading white wire make sure you cover all exposed wire with electrical tape(tight)when your done or if the wire touches any other metal you will have a short.(trip a breaker and you wont know if you hooked it up right.good luck with that old wire
Radio Constant 12V+ Wire: White/Yellow Radio Switched 12V+ Wire: Yellow/Red Radio Ground Wire: Black Radio Illumination Wire: Red/Black Radio Dimmer Wire: N/A Radio Power Antenna Trigger Wire: Yellow/White Radio Amplifier Turn On Trigger Wire: N/A Front Speakers Size: 6 1/2? Front Speakers Location: Doors Left Front Speaker Wire (+): Blue/Green Left Front Speaker Wire (-): Gray/Black Right Front Speaker Wire (+): Red/Green Right Front Speaker Wire (-): Brown/Black Rear Speakers Size: 6 1/2? Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): Blue/Yellow Left Rear Speaker Wire (-): Gray/White Right Rear Speaker Wire (+): Red/Yellow Right Rear Speaker Wire (-): Brown/White
Radio Constant 12V+ Wire: White/Yellow Radio Switched 12V+ Wire: Yellow/Red Radio Ground Wire: Black Radio Illumination Wire: Red/Black Radio Dimmer Wire: N/A Radio Power Antenna Trigger Wire: Yellow/White Radio Amplifier Turn On Trigger Wire: N/A Front Speakers Size: 6 1/2? Front Speakers Location: Doors Left Front Speaker Wire (+): Blue/Green Left Front Speaker Wire (-): Gray/Black Right Front Speaker Wire (+): Red/Green Right Front Speaker Wire (-): Brown/Black Rear Speakers Size: 6 1/2? Rear Speakers Location: Rear Deck Left Rear Speaker Wire (+): Blue/Yellow Left Rear Speaker Wire (-): Gray/White Right Rear Speaker Wire (+): Red/Yellow Right Rear Speaker Wire (-): Brown/White
The fuel pump relay is located in the engine compartment on the driver's side of the dash panel near the power brake booster assembly. It has a 5-pin connector with the following wire colors: A (2) Red wires B (1) Black/White wire C (1) Dark Green/White wire D (1) Red wire E (1) Orange wire