To reset a Schwinn bike lock combination you will have to locate the reset lever at the top of the lock. Push and press this lever until it is flat. Enter the combination that you wish to use. Press the reset lever again to set the combination.
On a the first nano with movies go to extras, screen lock you should get 2 options lock or reset click reset
If it is a school locker go to the office they have the combination. If it is lock you bought look on the bottom or side sometimes there is a reset button. If there isn't look at the brand and see if you can call them on how to open it. All else fails you will have to cut it open.
the dial in poptropica is on the machine. once you have reset the dial go up until you see the enter sign on top of the fence.
Step1- go to extras Step2-go to screen lock Step3-go to lock or reset combination
i go to settings under security setttings then click phone lock enable
What you do is go back to the store you got your lock and ask a staff there to help you. And then ask him/her what your problem is so they can help you. Hope this works, bye.
To reset the combination on a Protege luggage lock, first, open the lock using the current combination. Then, locate the reset button or lever, usually found on the side or back of the lock. Press and hold the reset button while setting your new combination by turning the dials. Release the button to save the new combination, and test it to ensure it works before closing the lock.
To reset the phone lock on the Samsung Galaxy s2 go to the settings section and select password options. then select password reset and enter your current password followed the password you would like to change it to.
Dial 611 from phone. Go through options to reset password.
The following assumes you have already attached the mounting bracket to your bicycle as shown on the packaging. With the bike lock open, slide the male end (not the end with the dial numbers) up thru the bottom hole of the bracket unitl it seats against the bottom of the mounting bracket (i.e. it won't go any farher). The inserted end should now be sticking up throught the top of the bracet. Now, just connect the other end of the lock to the end sticking up, and rotate the dial to lock and secure. Now, with your right hand, palm open, quickly, but softly thrust your palm against you forehead and enjoy the rest of the day. Oh, and shame on Bell ---they could have put something on the packaging.
turn the steering, full lock to the left, then full lock to the right, while being stationary, light will then go out.