0
What else can I help you with?
How many tons of sand does a triaxle dump truck hold?
Depends. 17 tons, give or take, is typical.
How many tons of gravel can average dump truck can hold?
12 ton
How many tons of gravel in a yard.?
1
How much asphalt does a triaxle hold?
A typical triaxle truck can hold between 12 to 16 tons of asphalt, depending on the size and configuration of the truck. The volume is generally around 10 to 14 cubic yards. However, specific capacities can vary based on the truck's design and local regulations. Always check with local standards for precise measurements.
How many tons in cubic yard of gravel?
8
If you have 200 yards of pea gravel how many tons is that?
260
Driveway is 300ftx20ftx4in of 2in gravel how many tons?
103.41
How many tons are in a dump truck of gravel?
A standard dump truck can typically carry between 10 to 14 tons of gravel, depending on its size and configuration. Smaller trucks may hold around 5 to 10 tons, while larger models can accommodate up to 16 tons or more. The actual weight can also vary based on the type of gravel and its moisture content. Always check with the specific truck specifications for precise capacity.
How many tons is 3000 yards of gravel?
The weight of gravel can vary depending on its type and moisture content, but a common estimate is that one cubic yard of gravel weighs about 1.5 tons. Therefore, 3,000 yards of gravel would weigh approximately 4,500 tons (3,000 yards × 1.5 tons per yard). Always check the specific weight for the type of gravel being used for a more accurate calculation.
How many tons of 57 gravel in 1 cubic yard?
A cubic yard of 57 gravel typically weighs around 1.4 tons or 2,800 pounds.
How many tons is in a triaxle load?
A typical triaxle dump truck can carry between 12 to 16 tons of material, depending on local regulations and the truck's specifications. The exact capacity may vary based on factors such as the type of material being transported, the truck's weight limit, and state or regional weight restrictions. Always check local guidelines for precise weight limits.
How many tons are in 1 yard of gravel?
One yard of gravel typically weighs between 1.5 to 2 tons, depending on the type and composition of the gravel. On average, you can estimate about 1.5 tons per yard. Therefore, for specific projects, it's important to check the density of the gravel being used for a more accurate conversion.
