Hit it with a hammer. If you hit it hard enough, it will crack.
get a axe and hit it at the code an it will crack
To open a Wordlock, you need to know the specific word or combination of letters that corresponds to the lock. Typically, you would rotate each dial to align the letters of your chosen word with the lock's markers. Once all dials are set correctly, you can pull the shank of the lock to open it. If you don't know the word, you may need to try different combinations or refer to the lock's instructions for resetting it if applicable.
There are a few ways that you can reset your 5 letter WordLock if you have forgotten the combination. One way is to use the reset tool that comes with the lock. This tool is a small rod that is inserted into the lock in a specific way in order to reset the combination. Another way to reset the lock is to contact the manufacturer and request a new combination.
Simply, flash a light so you have clear view of the slots. Move the combination letters so that all of the slots are open and then check if it worked by inserting 'key' into slot.
To reset your WordLock bike cable, first ensure that you know the current combination. If you don’t remember it, you may need to refer to the manufacturer’s instructions, as some models have a specific reset process. Typically, you can set the lock to a specific position, then press the reset button or switch, and enter a new combination. Always make sure to choose a combination that is memorable yet secure.
These are the steps: 1. Scroll to your password that you want to change then unlock the lock 2. Take the side off that comes off 3. Change the letters to your new password you have chosen 4. Put the side back on and lock There you go! That's how I always change mine.
If the Vaultz lock box has a combination lock, you need the combination to open and/or reset it. If it has an actual key lock, one can be ordered from the company.
A slate
To reset the combination on a WordLock, first, locate the reset lever or button, usually found on the side or back of the lock. Turn the dials to your desired new combination while holding down the reset lever/button. Once you've set the new combination, release the lever/button to save the new settings. Make sure to test the new combination before relying on it for security.
A bike lock is easy to use when it is easy for the owner to lock and use, but difficult for a thief to crack or break. It should have a lock that can be opened either with a key or combination.
Hit it hard with a hammer. Either the lock will break open, usually what happens, or you'll break whatever the lock is on.
There's a pressure point at the bottom, and if you hit it just right, it will break.