With the key. If you do not have the key, take it to a gunsmith. If you are not comfortable taking it to a gunsmith, you are the reason the lock was put there in the first place.
To unlock a U-lock with a key, insert the key into the lock cylinder and turn it clockwise until the lock opens. Be sure to keep the key in a safe place for future use.
Some of her books are in Colby, North Carolina but it snows in this one so i am not sure.
lock smith . take hinges off the door or take the door knob and plates off the door
place key in lock and turn
Take your title to a Harley dealer. They can cut you a key or get you a key code that a locksmith can use to make you your key. You could also remove the ignition lock or secondary lock (helmet or gas tank or seat lock), take it to a locksmith and they will make you a key. They will ask for proof of ownership.
Press the Num Lock key. It's in the top left of the keypad on my keyboard.
Buy a lock and take it to a locksmith, who can key it to your current key. Or, go to a locksmith and buy one from them so you don't have to pay extra. Most locksmiths will key the lock to your key at no additional charge when you purchase a lock from them.
That was a Mopar tradition at the time, to lock the car from the outside one has to use the key to lock it manually once the door is closed.
Place your first key into the ignition and turn to the second notch (do not start the car) Now close the door and place your second key into the handle lock Turn the key to the lock position and let it spring back to the central position. Hold down the Lock button on your new remote, you may hear a bleep from the car Now unlock the car using the key in the barrel and remove, then take your first key out of the ignition Close the door Your remote should now be coded
A key card is a magnetically encoded card that unlocks an electronic door lock. It is often used by hotels, in place of a metal key, so that the lock can be reprogrammed for each new user.
To rekey a lock, you will need a rekeying kit that matches the brand of your lock. Remove the lock cylinder from the door and take out the old pins. Insert the new key into the lock and use the rekeying tool to set the new pins to match the new key. Reassemble the lock and test it with the new key to ensure it works properly.