Find a John Deere 1949 Model M ignition switch schematic diagram?

Answer 1

I have a 1947 JOHN DEERe model m tractor serial # 12971. when i first got this tractor, i took it apart, and labled each wire at each end (where the wire went) at the ignition switch there is a terminal marked on the switch (lts). the other end of this wire goes to the headlights with a pig tail that goes to the tail light. there is another terminal on the switch that is labled (ign) this wire goes to the negative side of the coil. another terminal on the switch is labled (bat) this wire contains the 20 amp fuse and goes to the + terminal on the amp meter. another terminal on the switch is (mag) mine has a distributer so this terminal has no wire. the last terminal on the switch is labled (fld) this stands for field and the wire goes to the generator terminal labled (f). there are only four other wires in the system that do not go through the switch. the first is the wire from the plus side of the ignition coil to the distributor. the second wire is one from the (g) terminal on the generator to (gen) terminal on the cut out or regulator. the third wire in the system, that does not go directly to the switch, is the wire from the (bat) terminal on the cut out or regulator to the (+) terminal on the amp meter. the last wire is from the starter to the (-) terminal of the amp meter. I guess i should have said from the start that my tractor is a negative ground.