0
To adjust the valves on a 1998 Grizzly 600, first ensure the engine is cold and remove the seat and side panels for access. Rotate the engine to top dead center (TDC) on the compression stroke for the cylinder you are adjusting. Use a feeler gauge to check the clearance between the rocker arm and the valve stem; the intake should be set at 0.10 mm (0.004 in) and the exhaust at 0.15 mm (0.006 in). If adjustments are necessary, loosen the locknut and turn the adjusting screw to achieve the correct clearance, then retighten the locknut.
What else can I help you with?
Does 1998 Yamaha 600 grizzly have a rev limiter?
no rev limiter on 98 model
What is the torque spec for the head and cylinder on a grizzly 600 98?
9 ft lbs
What is the oem tire size for a 98 Yamaha grizzly 600?
Front is 25x8x12 and Rear is 25x10x10
How come im not gettig no eletric to coil on a yamaha grizzly yfm 600?
Your stator mite have gone bad. I had the same prob on my 98 grizzly 2 yrs ago and that's what it ended up being. But I also changed the computer box on the frame
How much oil does your 98 Yamaha grizzly 600 take?
The 1998 Yamaha Grizzle 600 all terrain vehicle has an oil capacity of 2.1 quarts. The weight of the oil varies depending on the temperature in which the vehicle is usually operated.
How do you adjust valves on a 2000 3.1 Malibu?
you dont, all that is done is torque rocker arms to::98 and later--168 in lbs. step 2 rotate an additional 30-degrees,
How do you adjust carburater on 98 subaru?
If you have a carburetor on a 98 subaru, I'd like to see it.
How do you adjust the belt tensioner on a 98 Mercury Mystique?
that automatic dont need adjust that automatic dont need adjust
How much for a 98 Honda civic hx?
In good conditions 600
How do you adjust throttle cable on 98 cirrus?
The throttle cable is not adjustable.
Cost of replacing water pump on 98 Ford ZX2?
cost me 600
Spark plug gap Yamaha grizzly?
From the 98-01 service manual - .03-.04 inch (.8-.9mm)
