It would hurt it. Changing the spring will make the pedal harder to push down. The spring pulls the pedal up.
the return spring on the clutch pedal assembly must be replaced.
you need to change the spring in the clutch cylinder ,you find more info on at alfa .net
the clutch pedal
The pedal on the left is the clutch. You press it when you are changing gears.
To replace the clutch pedal return spring on a Kenworth W900, first, ensure the vehicle is safely parked and the engine is off. Remove any necessary panels or covers to access the clutch pedal assembly. Disconnect the old return spring from the clutch pedal and the chassis, then install the new spring by attaching it to the same points. Finally, reassemble any removed components and test the pedal for proper function.
There could be a few reasons why a clutch pedal is stiff on a 1999 Accord. The clutch may be low on fluid or the clutch may need to be replaced.
How do you install a cluch pedal spring on a 93 honda accord
Not sure what you're asking about. I have a 1998 S10 standard shift that still has a clutch pedal.
Adjustments is behind top of the clutch pedal. Clutch spring should be under the car on the transmission closest to the motor block, next to the slave cylinder.
clutch pedal over -centre spring pressure
clutch master slave cylinder just replaced mine and now it doesn't do it
If it has a hydraulic clutch, I believe they can not be adjusted. When the pedal travel is no longer acceptable the clutch disc must be replaced.