Starts you off in second gear. Also changes the ECM profiles giving you better revs.
The Highlander is a sport utility vehicle made by Toyota since 2000. The ECT button near the gearstick is a electronically controlled transmission snow mode, which means when engaged this mode will start the vehicle slowly to avoid wheel spinning in bad weather especially snow.
pretty sure it already is... Added: FIrst answer is correct. The Highlander is an All-Wheel-Drive (AWD) vehicle when the OBD computer senses the need for a 4-wheel mode, and automatically shifts into it.
ECT button allow you to switch between Power and Normal mode. Normal mode is more fuel efficient but not as responsive. In Power mode cars become more responsive but consume more fuel.
The MODE function finds the most commonly occurring number in a range of numbers.
To re-set Toyota Highlander 'maintenance required' dashboard warning light: Turn on the ignition and observe the odometer window. Ensure that it is set on the total accumulated mileage of the vehilce (NOT the trip meter). Turn off ignition. With the ignition off - depress the little plastic switch that changes the odometer to the trip meter and then while holding the switch in the depressed position, turn on ignition (it is not necessarry to start the car). Continue holding the swtich down for 5-10 seconds and you will see the odometer window flash back to zero. Release the switch and turn the ignition off, and it will be re-set for another 7,500 miles.
There are poo mode, pee mode, anus mode, vomit mode and disgust mode. (P.S.The super farting mode is the best one to take photographs)
The Toyota yaris is a subcompact car produced by the Toyota car company since 1999. This car replaced the Toyota Starlet mode in Japan.
The MODE function.
There is a switch on the dash that allows the driver to disable the gasoline engine and run on battery only. Unfortunately, that battery is still a nickel metal hydride type, which results in a range of only about a mile!It is really more of an advertising gimic than a useful option.
To get the mode, meaning the most common value in a list of values, then you use the MODE function. So if you were finding the mode of cells in the range from B2 to E25, then the formula would be: =MODE(B2:E25)
Usually function key F11 toggles full-screen mode on & off.
In Excel you can calculate the mode from the set of values by using the MODE function. If you wanted the mode from the range of cells from A2 to D50, then it would be:=MODE(A2:D50)