Use any Automatic Transmission Fluid type F, or use JOHN DEERe low viscosity hydraulic fluid
The John Deere LX176 lawn tractor typically requires about 4 quarts of transmission fluid. It's important to use the recommended type of fluid, which is usually a low-viscosity hydraulic fluid. Always check the owner's manual for specific guidelines and to ensure proper maintenance.
Low Viscosity Hy-Gard is what John Deere recommends and sells for this application. It is a all weatherhydro-staticfluid that meets the JDM J21A requirements.
1995
John Deere 450H Dozer hydralic transmission how can drain
For a hydrostatic transmission system like that in a John Deere LX176 lawn tractor, you should use a high-quality hydraulic fluid that meets the manufacturer's specifications. Typically, this would be a low-viscosity hydraulic oil, such as John Deere Hy-Gard or a comparable fluid with a viscosity rating of ISO 46. Always consult the owner's manual for specific recommendations and ensure to check the fluid level regularly to maintain optimal performance.
John Deere does not advise changing trans fluid on the lx176 for two (2) reasons. (1) The possibility of contaminants getting in the resevoir. (2) The system has to be burped(bleeded) like you would car brakes. If you are unfimiliar with this process, you could be left with an immovable tractor or a substantial cost from a dealer to correct the problem. You are better off just topping off with wd10x30 motor oil.
what type of fluid does a john deere transmission transfer case use
Hydrostat Fluid
type F
John deere hy-gard or any good trans. Hydraulic oil
John Deere all-weather hydrostatic fluid or an equivalent type "F" automatic transmission fluid
Under fan