answersLogoWhite

0

The studs should be 16" apart.
If you're estimating the lumber, figure 1 stud per linear foot of wall.
You'll need the extra's for corners and headers and plates.

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How many studs in 14 foot wall?

there are 12 studs and 11 spaces in a 14' wall


How many studs 2x4x8 are needed on 60 foot wall on 16 inch centers?

To determine the number of studs needed for a 60-foot wall at 16-inch centers, first convert the wall length to inches: 60 feet x 12 inches/foot = 720 inches. Then, divide the total length by the spacing: 720 inches / 16 inches = 45 studs. Since you need one additional stud for the end of the wall, you will need a total of 46 studs.


How many inches apart are the studs in the wall?

Studs in a wall are typically spaced 16 inches apart.


What is the recommended spacing for studs 16 on center in a wall construction project?

The recommended spacing for studs 16 inches on center in a wall construction project is to place the studs at intervals of 16 inches along the length of the wall. This spacing provides structural support and stability to the wall.


How many 2x4 studs for a 52ft wall?

how many 2x4 studs for a 52 ft wall 16 and 24 inches on center


How many studs are in a 40 foot wall?

31 Studs not counting corners


How many 2x4x8 do you need for an 8 foot wall?

To determine how many 2x4x8 boards you need for an 8-foot wall, you first need to know the spacing of the studs. Typically, studs are placed 16 inches apart on center. An 8-foot wall requires approximately six studs (including one at each end), so you would need about 6 boards, assuming you are using the entire length of each board for the wall studs. Additionally, you may need extra boards for top and bottom plates, so it's wise to purchase a few more.


How many studs are in a wall if the wall is 10 feet long and the studs are spaced every 16 inches on center?

8 spaces, 9 studs.


How can I properly install metal studs in a wall for added support and stability?

To properly install metal studs in a wall for added support and stability, follow these steps: Measure and mark the layout of the studs on the wall. Use a stud finder to locate the existing studs in the wall. Cut the metal studs to the appropriate length using tin snips. Secure the metal studs to the existing studs in the wall using screws or nails. Ensure the metal studs are level and plumb before securing them in place. Add blocking between the metal studs for additional support if needed. Finish the wall by attaching drywall or other finishing materials to the metal studs. By following these steps, you can properly install metal studs in a wall to provide added support and stability.


You need to cut 2 x 4 x 8 long studs to the proper length to make a finished wall of 8' in height Underneath the studs there will be plate that's to what length should you cut the studs?

92 5/8"


How many studs in a wall that is 28' long 16 on center?

about 17 2x4 s If you have no windows or door openings and no partitions or corner framing you will need 13 studs and 3-16' 2x4's. How to figure this: Multiple the length of wall (16') by 12 (12" in a foot) and then divide by 16 (spacing 16") and add one for the end. 16x12=192 Divided by 16=12 + 1=13


How can I properly install studs in walls for a secure and stable structure?

To properly install studs in walls for a secure and stable structure, follow these steps: Measure and mark the locations for the studs on the wall. Use a stud finder to locate the existing studs in the wall. Cut the studs to the appropriate length using a saw. Insert the studs into the wall cavity and secure them with nails or screws. Ensure the studs are plumb and level using a level. Repeat the process for each stud needed in the wall to create a strong and stable structure.