49 seconds will be 0.049 easy.
If you need any help e-mail bee at florababy25@hotmail.com
I answer all questions
14 Seconds
that all depends on what kind of clock you have. some clocks tick for 60 seconds until it reaches the next minute. other clocks can have second marks on them that they move to. digital clocks do not have second marks unless you press a button that shows the seconds going up or down.
Depends on the clock. Probably seconds.
The answer to your question relating to time on a digital clock is: 11:43 PM
Digital clocks will be the most accurate because its computer operated.
1. Generally speaking, a digital clock is a digital device. The "heart" of any clock is whatever is used as its time base, and with a digital clock, some kind of digital timing circuit supplies that time base. From there, digital dividers and other circuits count seconds, and other circuits drive a display. 2. Yes by definition it is.
Analog, as opposed to digital.
how can you write 7 minutes after 3 on a digital clock
A digital clock can be looked at and the time will be known immediately. You do not need to know how to tell time with a digital clock.
14 Seconds
that all depends on what kind of clock you have. some clocks tick for 60 seconds until it reaches the next minute. other clocks can have second marks on them that they move to. digital clocks do not have second marks unless you press a button that shows the seconds going up or down.
I have a digital clock; I find it easier to read than analog clocks with hands and regularly spaced numbers.
Press "MODE" for 5 seconds, then when flashing, press "SET" till you get right time.
A digital clock is the quietest.
digital clock
You can purchase a digital clock radio online from stores such as Best Buy. Alternatively, you can purchase digital clock radios from retailers such as Amazon.
To reset the Ajanta Digital Clock ODC-70, locate the reset button, typically found on the back or bottom of the clock. Press and hold this button for a few seconds until the display resets. You may then need to set the time and date according to the manufacturer's instructions. If there is no reset button, try unplugging the clock for a minute and then plugging it back in.