This has too many variables. - What size is a 'bucket' - (I have seen all kinds)
2 - What strength is the concrete to be ? - Is it for a foundation, a pathway or a garage floor. -All are different strengths, different amounts of aggregate and different amounts of cement.
One ton
A typical mixture of concrete will be 10 to 15% cement, 60 to 75% aggregate, and 15 to 20% water.
To produce 1 cubic meter of concrete, the typical mix design requires approximately 1.5 to 2 cubic meters of sand and aggregate combined, depending on the specific mix ratio. A common mix ratio is 1 part cement, 2 parts sand, and 3 parts aggregate, which translates to about 0.5 cubic meters of sand and 0.75 cubic meters of aggregate. However, the exact quantities can vary based on the desired strength and application of the concrete. Always refer to a specific mix design for precise measurements.
The weight of aggregate can vary based on its type and moisture content, but a common approximation is that 1 cubic meter of aggregate weighs around 1.5 to 2 tons. Therefore, on average, 1 cubic meter of aggregate is generally equivalent to about 1.5 tons. It's important to check specific densities for accurate conversions based on the material used.
7 cement bags per 1 cubic meter of concrete......
One ton
A typical mixture of concrete will be 10 to 15% cement, 60 to 75% aggregate, and 15 to 20% water.
A cubic meter of concrete typically weighs about 2.4 tons, which includes the weight of the aggregate (stone), cement, water, and any additives. The stone itself usually represents a significant portion of this weight, but the exact amount can vary depending on the mix design. Generally, the aggregate portion can be around 1.5 to 1.7 tons per cubic meter.
For plain cement concrete, the aggregate used is of size 20 mm. For RCC structures, it is 40mm and for roads, it is 80mm
The density of aggregate can vary, but on average it is around 1.5 tonnes per cubic meter. Therefore, 1 cubic meter of aggregate would weigh approximately 1500 kg.
I'm assuming by bricki you mean aggregate? There are several different mixes of concrete that yield different strengths. One of the more common mixes is a 3/2/1 mix this combines 3 parts aggregate (crushed stone), 2 parts sand and 1 part portland cement. with this mixture to make 1 cubic meter of concrete you will need almost 1/2 cubic meter of aggregate, 1/3 cubic meter sand and 1/6 cubic meter portland cement mixed with about 75 liters of water. Different mixes use varying amounts of stone though the sand and cement mixture stays between 1 1/2 : 1 to 2:1
The weight of 10mm aggregate in 1 cubic meter depends on the density of the aggregate. On average, the density of 10mm aggregate is around 1.4 to 1.6 tonnes per cubic meter. So, the weight would be between 1,400 to 1,600 kg.
varies due to moisture content of aggregate and stiffnes of mix needed (slump)
concrete 2400 Kg/m3aluminun 2712 Kg/m3
The amount of rebar in a cubic meter of concrete can vary depending on the design specifications of the concrete structure. Typically, rebar makes up around 1-2% of the total volume of concrete, so in a cubic meter of concrete, there may be around 20-40 kilograms of rebar.
The mass of a cubic metre of concrete is 2250-2400 kilograms.
One cubic meter is equivalent to 35.23 cubic feet, or one cubic meter is equivalent to 1.35 cubic yards.