ATM = Atmospheres. It means the amount of pressure the watch can take in atmospheres before failure is assumed.
2 ATM is about 1/2 a meter under water.
so drop it in the sink and you're ok,,, drop it in the Mariana trench and kiss it goodbye ;)
It's a watch for underwater use, it will stand pressure up to 10 Atmospheres or 100m
HI sir 10 ATM is 100M so it's the same thing..
No, 10 ATM is not equal to 10 bar. One atmosphere (ATM) is approximately equal to 1.01325 bar, so 10 ATM is roughly 10.1325 bar. Therefore, 10 ATM is slightly more than 10 bar.
ATM is the abbreviation of atmosphere which is used for nautical measurements 1ATM is equivalent to 33 feet so Ur wrist watch is resistant to 33ft wile diving..
"3 ATM" on a watch is a pressure rating for 3 atmospheres (a unit of pressure equivalent to three times Earth's atmosphere) which is roughly equivalent to 30 meters (~100 feet) of water resistance (though most manufacturers will not recommend you swim or dive with it at all)
It's a watch for underwater use, it will stand pressure up to 10 Atmospheres or 100m
It means 10 atmospheres. This usually indicates a watch will remain waterproof to a depth of 10 atmospheres or about 340 feet of water.
HI sir 10 ATM is 100M so it's the same thing..
"ATM" stands for ATMospheres and the number before it, refers to the number of atmospheres of pressure the watch will withstand before leaking. At sea level we are all subjected to one atmosphere of pressure, because we have one atmosphere of air above us pressing down. For every 33 feet (10 metres) underwater you go, the pressure increases by 1 atmosphere. Therefore, at 33 feet underwater the pressure is 2 atmospheres (2 ATM), at 66 feet underwater the pressure is 3 atmospheres (3 ATM), etc. So 5 ATM is equivalent to 132 feet (40 metres) underwater. In conclusion, the ATM rating of a watch is the number of atmospheres of pressure the watch will withstand before breaking/leaking. To convert ATM 's into the depth rating in metres just subtract 1 and multiply by 10. eg: 5 ATM = (5 - 1)*10 = 40 metres.
"ATM" stands for "atmospheres," and the ATM rating on your wristwatch is the depth before the sea surface at which you can safely wear your watch. Most watches are rated between 1 ATM and 10 ATM. For more information, see the Related Link.
ATM is the depth by which water resistance is measured on a watch. ATM stands for Atmospheres. 1 atmosphere is equivalent to appx. 33 feet depth in water. So if a watch is 3 ATM = 100 ft. water resistant.
ATM is the abbreviation of atmosphere which is used for nautical measurements 1ATM is equivalent to 33 feet so Ur wrist watch is resistant to 33ft wile diving..
Yes there is . To watch you.
1,013.25 kPa
The words ATM RFD on a bank statement have to do with ATM machine use. ATM RFD means ATM refund.
10 atm on a watch refers to the water resistance level, stating that the watch can withstand pressures equivalent to being submerged under 100 meters of water. It is not suitable for activities like scuba diving, but can withstand activities like swimming and showering. It is always recommended to check the specific water resistance guidelines for your watch model to avoid damage.
ATM means "at the moment" "I am at my dad's at the moment."