Almost 1 (0.9652cm)
Algebraic Steps / Dimensional Analysis Formula0.38 in*
2.54 cm
1 in
=
0.9652 cm
In rockwell, it should be between 23-32 HRC
Begin tightening by rotating nuts clockwise, choosing one bolt first, then choosing the bolt 180° opposite second. then one at 90° and then the one 180° from that. Then step over one nut from the first nut tightened (decide for yourself clockwise or counter-clockwise) and continue the same pattern as with the first four. .... Number the flange clockwise with this sequence: 1, 13, 25, 9, 17, 5, 33, 21, 3, 15, 27, 11, 31, 19, 7, 35, 23, 2, 26, 10, 30, 18, 6, 34, 22, 4, 16, 28, 12, 32, 20, 8, 36 & 24. Now tighten in the criss cross pattern using the numbers. continue to increase torque and go through the pattern until you reach your final torque.
There are 2.54 centimetres in one inch. Therefore, 38 inches is equal to 38 x 2.54 = 96.52 centimetres. Algebraic Steps / Dimensional Analysis Formula 38 in* 2.54 cm 1 in = 96.52 cm
About 15 inches
There are 2.54 centimetres in one inch. Therefore, rounded to two decimal places, 38 centimetres is equal to 14.96 inches. There are 12 inches in one foot. Therefore, 14.96 inches is equal to 14.96/12 = 1 remainder 2.96 or 1 foot 2.96 inches.
There are 2.54 centimetres in one inch. Therefore, 3.8 inches is equal to 3.8 x 2.54 = 9.652 centimetres.
38 inches is the same as 96.52 centimeters. .
There are 100 centimetres in one metre. Therefore, 38 centimetres is equal to 38/100 = 0.38 metres.
17 inches = 43.18 centimeters.One inch is equal to 2.54 centimetres. Therefore, 17 inches is equal to 17 x 2.54 = 43.18 centimetres.43.18 cm
There are 10 millimetres in one centimetre. Therefore, 38 millimetres is equal to 38/10 = 3.8 centimetres.
38 inches = 3.17 feet
There are 100 centimetres in one metre. Therefore, 2 metres 38 centimetres is equal to 2 x 100 = 200 + 38 = 238 centimetres.
38 inches is equal to 3.167 feet.
38 inches