answersLogoWhite

0

Cost is dependant on the grade and form and where it is produced - labour costs.

User Avatar

Wiki User

16y ago

What else can I help you with?

Continue Learning about Mechanical Engineering

What is the Fracture Toughness Values of Stainless Steel 304?

88 MPa.m-1/2


What is the heat conductivity difference between copper and stainless steel?

A figure of merit for copper is 231A figure of merit for stainless steel is 8.1A figure of merit for steel (mild) is 32A figure of merit for aluminum is 136.The units are BTU / H * ft * Degrees F.For a given length of time copper will conduct almost twice as much heat as aluminum and 28 times as much as stainless steel (but only about 7 times as much as regular steel). This is why there are copper bottomed stainless steel pots.From the definition of thermal conductivity: for 1 Ft cube of copper it would take 231 BTU per hour to maintain a 1 degree (Fahrenheit) temperature difference across the the length of the cube. This compares to 0.04 BTU for a 1 ft. cube of fiberglass insulation.


What is the value of Shear Modulus for 304 stainless steel?

The Elastic Modulus (aka Young's Modulus) for annealed 304 stainless steel is 193 GPa. More data is available at: http://www.azom.com/details.asp?ArticleID=965


How do you convert meter water column into bar pressure?

Ten meter water column is expressed as a column of water of 1,000 cm high with a section of 1 x 1 cm. This equals 1 dm3 of water which has a mass of 1 kg. As such 10 meter water column exerts a pressure of 1 kg/cm2. 1 kg/cm2 = 0.980665 bar Therefore: 1 m WC = 0.1 kg/cm2 = 0.0980665 bar 0.980665 bar = 1 kg/cm2 = 10 m WC 1 bar = 1.0197162 kg/cm2 = 10.197162 m WC


Cast steel IS 2707 grade 1?

cast steel is 2707

Related Questions

How many inches is 1 kilogram of stainless steel?

Probably meant cubic inches... start with the density of stainless steel. Of course that depends on the consist of the steel... let's just use a nice round number like 8000 kg/cubic meter. Convert cubic meters into cubic inches using conversion factors: 8000 kg/m3 * (1/39.37 in/m) (1/39.37 in/m) (1/39.37 in/m) = 8000 kg/m3 * (1/61023.377953 in3/m3) ~ 0.131 kg/in3 That's the number of kilograms per cubic inch. To find the number of cubic inches per kilogram, merely invert: 1/0.131 kg/in3 ~ 7.628 in3/kg So, around 7.628 cubic inches are in 1 kilogram of stainless steel.


How much does 1 square meter of stainless steel weigh?

You cannot weigh an area, but you can weigh a volume... so, one cubic meter of stainless steel weighs 7480 - 8000 kg. See related link for the source.


What is the cost of 1 kg reinforcement steel?

i think 15


Why does 4 into 1 exhaust turn blue?

The exhaust is stainless steel. Heat causes stainless steel to turn blue.


How many joules does it take to warm steel by 1 degree?

That depends on whether you are talking about 1 °C or 1 °F. It also depends somewhat on the type of steel. Warming carbon steel by 1 °C requires about 0.49 J/kg of steel. Warming 316 stainless steel 1 °C requires about 0.45 J/kg of steel. To find the answer for 1 °F, multiply the values by 5/9.


What is Relative Permeability of stainless steel?

Relative permeability is a measure of a material's ability to become magnetized when exposed to a magnetic field relative to a vacuum. Stainless steel typically has a relative permeability close to 1, meaning it is not easily magnetized. However, certain types of stainless steel with specific compositions or treatments may exhibit slightly higher relative permeability.


Where can I find a good cheap source of stainless steel tanks?

Here is a list of suppliers that sell both new and used stainless steel tanks: http://www.thomasnet.com/products/tanks-stainless-steel-83330209-1.html There are several companies that provide cheap stainless steel tanks. The best place to find them online is from aaronequipment.com,they sell both used and new stainless steal tanks.


How many kg of steel reinforcement in 1 cubic meter?

7600 kg


How do you make stainless steele?

Stainless Steel contains between 10 1/2 and 11% Chromium. The layer of Chromium Oxide keeps the steel from rusting. It's interesting to note that Stainless Steel is called that because it "Stains Less". That does not mean that is is stain PROOF.


What are the typical dimensions of a stainless steel round bar?

United Stainless LLP is a leading Stainless Steel Round Bar Manufacturers in India.The typical dimensions of a stainless steel round bar can vary depending on the specific application, grade of stainless steel, and manufacturer. However, there are some general standard sizes for stainless steel round bars Diameter: Small Diameter: 1/16 inch (1.6 mm) to 1 inch (25.4 mm), Medium Diameter: 1 inch (25.4 mm) to 6 inches (152 mm), Large Diameter: 6 inches (152 mm) to 24 inches (610 mm)


What is 1810 stainless steel?

1810 Stainless Steel is the European grade that is equivalent to AISI 304 Stainless Steel. It's the most common stainless steel going. Here's the rundown: Fe, <0.08% C, 17.5-20% Cr, 8-11% Ni, <2% Mn, <1% Si, <0.045% P, <0.03% S


Which one is easier to lift 1 kg steel or 1 kg cotton?

Both 1 kg of steel and 1 kg of cotton weigh the same amount and would require the same amount of force to lift. The difference lies in the volume and density of each material, where steel would be smaller and denser than cotton.