0
What else can I help you with?
What is the effect of cooling load on wet bulb approach of a cooling tower?
Cooling load in kw is increase the temperature of the water before enter the cooling tower, thus the differential heat energy level is high compare to surrounding temp., so it will transfer heat more to surrounding and leave the tower with low temperature, and it will become more like to approach the wet bulb temp., this happens if the variables such the water flow, and the air velocity is kept constant.
What is the effect of boron content on steel?
A small amount of boron (~0.1%) will make steel very very hard. So hard in fact that it can be used effectively in cutting tools or in applications where durability/long life are required. However, this alloy is quite susceptible to temperature change and so shouldn't be used in hot applications.
What is the effect of annealing on tensile of steel?
Reducing stress in the steel.
What is a negative effect of the jet engine?
Noise pollution would be one.
What is tension and compression?
Tension and compression takes place when an object has a force on another object. The tension is when the force is causing a pulling effect on part of the object. The compression is when the force is causing a contracting effect on part of the object.
Effect of atmospheric temperature on turbine output?
The output of a combustion turbine decreases as the ambient temperature increases due to the fact that the mass flow rate of air decreases as the air becomes less dense at higher ambient temperatures
How does the surface temperature of concrete compare to the ambient air temperature around it?
Ambient air and surface temperature do not usually equal each other. The air temperature will usually be higher than the surface temperature because the surface must absorb the temperature around it which happens steadily instead of right away.
What is the effect of ambient temperature on the properties of water?
The ambient temperature affects the properties of water by influencing its density, viscosity, and ability to dissolve substances. As temperature changes, water can expand or contract, affecting its volume and ability to flow. Additionally, temperature can impact the solubility of substances in water, as higher temperatures generally increase the solubility of solids and gases.
What does the fault code p1942 mean on a 2000 dodgedurango?
P1942 Transmission adaptation, On a Dodge Durango the ambient temperature sensor is used by the DPLV, heated oxygen sensor circuit and a transmission fluid temperature sensor , If the ambient temperature is not rational in regards to the engine temperature sensor the transmission temperature will adapt to a substituted temperature value, this in turn will effect the 2-3 shift points on the transmission,
What is the effect on battery capacity at very low ambient temperature?
this has an effect as it more likely to fail in the winter as in the summer, this is because the electrons has difficultly to pass through the plates, as the electrolyte is nearly freezing.
Is a side effect of ambient sleep walking?
yes
How does eddy current loss effect a transformer?
Eddy currents act to increase the temperature of a transformer's core above ambient temperature, resulting in a loss of energy through heat transfer -thus reducing its efficiency.
What is the effect on batteries at high ambient temperatures?
they will burn out faster
Will 90 plus outdoor temps cause the service engine light to come on?
Ambient temperature Should have no effect on Service engine light Have vehicle scanned to determine the problem
What is the operating temperature for a 1992 Chevy s10 pickup with air conditioning?
Once its warmed up the average temperature should be about 190 degrees. If its any hotter you might want to check your cooling system. The EGR valve can also effect your temperature
What effect temperature?
effect of temperature
You have air condtioner on drive hit the brake and air get hot?
Air conditioning relies largely on the ram air effect. As it circulates through the system, the refrigerant becomes superheated and cooled at various points in the air conditioning system, and will change states from a vapor to a liquid. From the compressor, the refrigerant comes out as a high pressure vapor, and enters the condenser. The condenser is essentially a heat exchanger, which requires the refrigerant to be hotter than the ambient air temperature outside. When a vehicle suddenly decelerates, the cooling effects of the ram air effect are reduced, and heat exchange isn't conducted as efficiently as when the vehicle is in motion.
