Graphite bcoz it exapands on cooling
in general:
and also negative allowance is generally provided for the internal cavities in the casting so that upon cooling they contract to near the original dimension
Graphite
Duplex Stainless Steel pipes are using when the corrosion allowance is exceed the limit to do Stainless Steel pipes. The maximum corrosion allowance allowed in a Design life (7000 cycle / 20 years) is 3 or 6 mm. This having a high yield strength than the S.S pipes
There are two.
LOW CARBON steel material
the material looses its shape
The density of material is expressed as volume divided by mass.
water..............
Taper allowance
Brass
so that the material does not fray.
Medical Allowance is a benefit not a privilege. It is generally provided by the Company to its employees in lieu of E.S.I. benefit.
cast iron
the amount of material required to form the rivet on installation
no- he must pay for the food he eats.
yes
It could be as big as you want it to be, but it is usually about a half and inch wide all the way around. The standard seam allowance is 5/8 inch.
the reinforcement which provided at negative moment developed section.
The amount of Family Separation Allowance for the US Air Force (USAF) is $250 per month. This allowance is provided to military personnel who are required to live separately from their dependents due to military duties for a period longer than 30 days.