A grade 5 hardness bolt is a bolt made of medium carbon steel and depending on the manufacturer can either be or not heat treated.
Grade 10.9 bolts or capscrews have a minimum tensile strength of 1040N/mm2 and a hardness of 320 - 380Hv10. Grade 12.9 bolts or capscrews have a minimum tensile strength of 1220N/mm2 and a hardness of 385 - 435Hv10. The 12.9 fastener is therefore a higher grade (hardness and tensile strength) fastener compared with 10.9 grade
The Rockwell C Hardness for a grade 10.9 fastener is 32 - 39HRC or 320 - 380Hv10
Minimum hardness of Mild steel is about 140 Vickers hardness.
grade refers to composition and strength. Generally a higher Grade ( number or alphabet) is a stronger material. For example Grade C is stronger than Grade A Grade 8 bolt is stronger than grade 5 bolt.
In Vickers hardness test the for used is much lighter than the force used in Rockwell hardness test, The Rockwell hardness test is the considered to be the most routinely used technique to measure the hardness of materials because of its simplicity and because it does not require specific skills in order to perform it.
Grade 10.9 bolts or capscrews have a minimum tensile strength of 1040N/mm2 and a hardness of 320 - 380Hv10. Grade 12.9 bolts or capscrews have a minimum tensile strength of 1220N/mm2 and a hardness of 385 - 435Hv10. The 12.9 fastener is therefore a higher grade (hardness and tensile strength) fastener compared with 10.9 grade
They replace the factory body mounting bolts.
The Rockwell C Hardness for a grade 10.9 fastener is 32 - 39HRC or 320 - 380Hv10
Hardness
27 to 36
Correct, a 5 hardness can scratch a 5 and below.
on the hardness scale it is a 5-6
About 5 on Moh's hardness scale.
The Hardness is 6-5-3
The hardness of Turqoise is a 5-6 on the Mohs hardness scale.
the hardness scale for the mineral hornblende is 5-6.
Uranite is not correct, if you mean URANINITE, it is ranges 5-6 hardness.