0
What else can I help you with?
A mineral can be scratched by a brass washer but cannot be scratched by a copper coin.is a test of what?
This scenario tests the hardness of the mineral using the Mohs scale of hardness. Since the mineral can be scratched by a brass washer but not by a copper coin, it indicates that the mineral has a hardness greater than that of copper (which has a Mohs hardness of 3) but less than that of brass, which typically has a hardness around 3 to 4. This allows for an assessment of the mineral's relative hardness compared to common materials.
What grade is a bolt with hardness Rc 27-34?
A bolt with hardness Rc 27-34 falls under the Grade 5 category. Grade 5 bolts are medium carbon steel that is quenched and tempered for increased strength and hardness. They are commonly used in automotive and general engineering applications.
What is the RC hardness of inconel?
Inconel typically has a Rockwell C (RC) hardness of around 20-35, depending on the specific grade and heat treatment.
What is the hardness of the potash?
2-4 on the Mohs Hardness scale
What is the hardness of kaolin?
Kaolin has a hardness of about 2 on the Mohs scale. This means it is relatively soft and can be easily scratched with a fingernail.
What rockwell c hardness is grade 10.9?
The Rockwell C Hardness for a grade 10.9 fastener is 32 - 39HRC or 320 - 380Hv10
The grade of a fastener such as a bolt is a measure of its?
Hardness
A mineral can be scratched by a brass washer but cannot be scratched by a copper coin.is a test of what?
This scenario tests the hardness of the mineral using the Mohs scale of hardness. Since the mineral can be scratched by a brass washer but not by a copper coin, it indicates that the mineral has a hardness greater than that of copper (which has a Mohs hardness of 3) but less than that of brass, which typically has a hardness around 3 to 4. This allows for an assessment of the mineral's relative hardness compared to common materials.
Hardness of grade 5 bolts?
A grade 5 hardness bolt is a bolt made of medium carbon steel and depending on the manufacturer can either be or not heat treated.
What is 10.9 grade bolt hardness?
27 to 36
What grade is a bolt with hardness Rc 27-34?
A bolt with hardness Rc 27-34 falls under the Grade 5 category. Grade 5 bolts are medium carbon steel that is quenched and tempered for increased strength and hardness. They are commonly used in automotive and general engineering applications.
Difference between 10.9 and 12.9 tensile bolts?
Grade 10.9 bolts or capscrews have a minimum tensile strength of 1040N/mm2 and a hardness of 320 - 380Hv10. Grade 12.9 bolts or capscrews have a minimum tensile strength of 1220N/mm2 and a hardness of 385 - 435Hv10. The 12.9 fastener is therefore a higher grade (hardness and tensile strength) fastener compared with 10.9 grade
Which mineral has a hardness of 2?
Gypsum is the mineral listed at 2 on the Mohs hardness scale.
What is the RC hardness of inconel?
Inconel typically has a Rockwell C (RC) hardness of around 20-35, depending on the specific grade and heat treatment.
What is the hardness of granite in Mohs hardness?
it is 6 1/2 in the mohs hardness scale
What is the hardness of Grade 1004 steel?
Grade 1004 steel, which is a low-carbon steel, typically has a hardness in the range of 120 to 156 Brinell hardness (HB) depending on its specific heat treatment and processing. Its low carbon content contributes to its ductility and machinability, making it suitable for various applications. For precise hardness values, it's essential to refer to the specific manufacturer's specifications or standards.
What is the hardness of the potash?
2-4 on the Mohs Hardness scale
