To increase CFM (cubic feet per minute) from a pulley system, you can change the pulley ratio to increase the speed of the driven component, such as a fan. By using a smaller drive pulley or a larger driven pulley, you can achieve higher RPMs, which typically leads to increased airflow and CFM. Additionally, ensuring that the fan or blower is properly maintained and free of obstructions can help maximize its efficiency. However, be cautious, as increasing speed too much can lead to increased noise and potential wear on the system.
increase drive pulley size
The CFM of the equipment are given, how to calculate Static Pressure for it.
2000 cfm. 400 a ton.
To convert CFM (cubic feet per minute) to BTU/hr (British thermal units per hour), you can use the formula: BTU/hr = CFM × ΔT × 1.08, where ΔT is the temperature difference in degrees Fahrenheit between the inlet and outlet air. The constant 1.08 is derived from the specific heat of air and the conversion factors of CFM to BTU. Therefore, the exact number of BTU/hr from CFM depends on the temperature difference you are considering.
The full form of CFM is "Cubic Feet per Minute." It is a unit of measurement used to quantify the flow rate of air or other gases. CFM indicates the volume of air that passes through a specific point in one minute, and is commonly used in HVAC systems, ventilation, and various industrial applications.
For better comfort you should go with 1.5 cfm per sq foot. Depending on how many windows and solar gain, you can increase the cfm.
to avoid the slip , increase the velocity ratio and increase belt and pulley life... thanku..:)
increase drive pulley size
A movable pulley can increase the effort force. By attaching the pulley to the object being lifted and pulling downward, the force required to lift the object is reduced, making it easier to lift heavier loads.
A pulley system that has multiple pulleys in line with each one having its output drive the next will increase the force. This would be called a tackle pulley.
Fixed Pulley!!
Snub pulleys are used to increase the angle of wrap of the driver pulley or and to change the direction of belt(deflector pulley)
A pulley or pliers
Changing the size of the pulley can affect the motor's speed, depending on the specific configuration of the pulley system. If you increase the size of the driven pulley while keeping the drive pulley size constant, it will decrease the speed of the output shaft. Conversely, if you decrease the size of the driven pulley, it can increase the output speed. Thus, the relationship between pulley size and motor speed is inversely proportional in a basic pulley system.
Pulleys can be used to increase torque or speed, depending on how they are configured. When the pulley with a larger diameter is driving a pulley with a smaller diameter, torque is increased while speed is reduced. Conversely, when a small pulley is driving a larger pulley, speed is increased while torque is reduced.
increase the cfm for the ahu
to increase and decrease the speeds gradully