0
What are the sources of errors while measuring Vernier height gauge?
Wiki User
∙ 12y ago
today i observed errors between puppy dial reading & height gauge dial reading. this was 10μ to 20μ when we go to .1 mm
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the standard height for urinal sensors with connection?
Standard height for urinal sensors should be 1450mm centre from floor level
What is the stack height of 1250 kva diesel generator set?
what should be height of stack of 1250 kva D.G as per Indian pollution boardA: it should be 7.1 meter + building height of 1250kva Dg set installed.
What is a jet engines dimensions?
It is the height, width and length of a jet engine.
Why the Deaerator is placed at height and mostly at 15.5mtr?
By putting deaerator at height, vapour doesn't form at the suction area of feed water pumps so cavitation phenomenon in the impeller can be prevented. also to get NPSH.
How are height dimensions usually obtained for exterior elevations?
by Projecting from a typical wall section -Alex:)
What are the types of measuring instrument?
mechanical instruments like height gauge,verneir caliiper
What tool can you use when measuring your height?
You can use a measuring tape, a ruler, or a yardstick to measure your height.
What is the analogy for height inches weight?
It is pounds. An inch is the measuring unit for height. A pound is the measuring unit for weight. The logic is as follows. height, weight -> (measuring unit for height), (measuring unit for weight) Some similar examples, If it were "height, distance and inches." the missing word would be "miles" If it were "height, age and inches." the missing word would be "years"
What is the analogy for height weight and inches?
It is pounds. An inch is the measuring unit for height. A pound is the measuring unit for weight. The logic is as follows. height, weight -> (measuring unit for height), (measuring unit for weight) Some similar examples, If it were "height, distance and inches." the missing word would be "miles" If it were "height, age and inches." the missing word would be "years"
Measuring length width height and distance are all forms of what measurement?
Measuring length, width, height, and distance are all forms of what measurement?
Height of an object above earths surface?
Altitude. Height. Depends on what you are measuring.
What tool is used in measuring height?
This depends on what you are measuring. A tool that can be used is a tape measure.
What do you do to get area after measuring length and height?
What is the question?
How do you set and adjust tools such as squares and protractors?
· Engineer`s squares require no adjustment because they are fixed, however, they must be checked regularly for squareness· Vernier height gauges, vernier callipers, vernier protractors and combination squares slide back and forth to the requires height/width/depth/angle and then a thumb screw is used to lock them into position· Dividers are spring loaded, and can be set using a steel rule to ensure accuracy
Which SI unit is appropriate for measuring the height of a person?
You can measure the height of a person in meters.
What measurement is best for measuring height of an adult?
Metres.
What is the tool for measuring height?
it is called a measureing tape
