0
The separate condenser, often used in steam engines, improved efficiency by allowing steam to be condensed separately from the engine's working cylinder. This process reduced the amount of heat lost and minimized the need for continuous heating, enabling the engine to operate more efficiently. By maintaining a vacuum in the condenser, the engine could utilize a greater pressure differential, leading to increased power output. Ultimately, it contributed to the overall advancement of steam engine technology during the Industrial Revolution.
What else can I help you with?
How do you calculate condenser capacity?
condenser capacity(kw) = compressor cooling capacity (kw) + compressor input (kw) power condenser capacity(kw) = Pf + Pa
How do you make the air condenser work?
An air condenser takes in the surrounding air(at about 45-50 degree Celsius). The vapor at high pressure enters the condenser and accepts the latent heat of condensation from the hot airthereby rejecting heat to condensing coils. The vapor then becomes liquid.
Will the steam power plant works without condenser?
no
What is ac condenser?
ac condenser means "Air Cooled Condenser". The cooling media is Air. The fluid or anything which is being circulated through (inside) the coils /tube being cooled by the exposed or forced air - which impinges over the outside of the coil / tubes. B.Kannan balakannan@live.com
What is a syncronous condenser?
A synchronous condenser is physically an electric generator/motor without a mechanical power source. Electrically a synchronous condenser changes the timing between rise and fall of current compared to voltage (phase angle). They also use stored energy to smooth small power fluctuations.
Can a condenser separate immisicable liquids?
Yes, a condenser can separate immiscible liquids by selectively condensing one of the liquids based on its boiling point. This process is called fractional distillation and is commonly used in chemical laboratories to separate mixtures of immiscible liquids.
What is the difference between a partial condenser and a total condenser?
In a total condenser te temperature is lowerd to a level on which all gasses turn to liquids. with a partial condenser you can separate gasses on there dew point. It means that the temperature is set to a level on wich a one or several gasses leave the partial condenser as a liquid and the others as a gas.
How do you xxplain what is meant by condenser splitting?
Condenser splitting refers to the process of converting a single condenser unit into two separate condenser units. This can be done for various reasons, such as increasing system capacity, improving efficiency, or enabling individual control over different sections of a building. By splitting the condenser, it allows for more flexibility in how the system operates and can lead to better overall performance.
How would you separate the components of a glycerol table salt and water solution?
Boiling off the water from a salt solution will separate the solid salt and water (which can be collected by a condenser).
Inventions of James watt?
separate condenser for a steam engine, planetary gears, printing machine among others.
What equipment would be used to separate a mixture of salt and water?
A process called distillation would be used to separate a mixture of salt and water. Equipment such as a distillation flask, condenser, and heat source would be necessary. The mixture is heated, and the water evaporates leaving the salt behind, which can then be collected.
Why did james watt invent the Separate Condenser?
James Watt invented the separate condenser to improve the efficiency of steam engines. By separating the condensation process from the main cylinder, he was able to reduce energy loss and increase power output. This innovation greatly enhanced the effectiveness of steam engines and played a key role in the Industrial Revolution.
The function of the condenser in a breaker points ignition system is to?
The function of the condenser in a breaker points ignition system is to keep the points from sticking together. If the points stick together during ignition it could cause the points to burn up. The condenser sends a signal to the points and then takes the signal away to make the points separate.
How do you separate the condenser from the radiator on a 1997 Mercury Mountaineer?
A very big HEADACHE until I finally found an easy way to do it: On a 2000 Mercury Mountaineer 5.0L, you remove the battery, then the battery platform (two bolts and one nut). Now you have room to stick a slotted screwdriver between the plastic interlocked wings of the condenser and the radiator. You twist the screwdriver to break off the overlapped sections of the wings on the old radiator. Now you can separate them and remove either or both the radiator and the condenser. When you install the new radiator and/or condenser, simply drill holes in the wings before installing them, then use a tie-down (cable tie) to secure the radiator and the condenser together.
Does a 1993 Jeep Cherokee Country have a separate belt for the air conditioner or does it run off the serpentine belt?
A/C Condenser is on the serpentine route.
How does a water-cooled reflux condenser function in a distillation process?
A water-cooled reflux condenser functions in a distillation process by cooling and condensing the vaporized substances back into liquid form. This helps separate and purify the components of the mixture being distilled.
How does a water jacket condenser function in the process of distillation?
A water jacket condenser cools down vaporized substances in the distillation process, causing them to condense back into liquid form. This helps separate the desired substance from impurities and allows for collection of the purified liquid.
