0
What else can I help you with?
What is the largest allowable minor diameter for an M6x1.0 screw thread?
the minor diameter should be between 4.917mm and 5.153 mm, so the largest allowable size is 5.153mm
What does a komatsu 6D125 engine mean?
It means that it is a six cylinder naturally-aspirated diesel engine with 125 mm piston bore
Calculate wrench size?
To calculate wrench size you measure across the flat surfaces of the nut or bolt, then pick a wrench marked with that size. Be careful, there are metric and SAE nuts and bolts and some wrenches are close but not right. -For instance you should not use a 1/2" wrench on a 12 mm nut. -It may look right, but will round the edges of the nut.
If sheet thickness is .5 mm what is the gauge?
Probably 25 gauge, which is .556 mm thick. However, 26 gauge is close too, it is .478 mm thick.
What size is M5?
The M5 thread specification (in mm) is as follows: Nominal diameter d = D Pitch P root radius r pitch diameter d2=D2 minor diameter d3 D1 thread height h3 H1 drill diameter mm M 5.00 0.80 0.115 4.480 4.019 4.134 0.491 0.433 4.20
What does the mm measurement in guns mean?
Size of the bullet
What is the Grain size of conglomerate?
Course grained it mean more than 2 mm.
What does 70 mm movie mean?
70mm is the size of the print. The film is 70mm wide.
What is the diameter circumference of a mens ring size 11?
i believe you mean US sizes Diam = 20.7 mm Circum = 64.1 mm
What does 12 iron mean in heel size?
12 iron is thickness, approx .25" or 6.33 mm.
What does 5-mm left lower pole hypodensity of left kidney mean?
its a size of a cyst or lump
Normal size of ovaries in mm?
The normal size of ovaries are the size of a Greek olive. They measure close to 30 mm x 15 mm x 15 mm in size.
Is 11 mm the size of a dime or nickel?
An 11 mm size is smaller than both a dime and a nickel. A dime has a diameter of 17.91 mm, while a nickel measures 21.21 mm in diameter. Therefore, 11 mm does not correspond to the size of either coin.
What does it mean for size DN 50?
DN": Diametre nominel - Nominal diameter of the valve, and "50" is the size of the valve in [mm]. Alternative is NPS (Nominal pipe size in inches).
What is the size of a MM?
show size of 8mm
What does mm mean in book publishing?
In book publishing, "mm" typically stands for millimeters and refers to the height of a book. It is used to indicate the size of the book to ensure consistency in printing and binding.
What are the Size ranges for sand silt and clay?
Sand particles typically range in size from 0.0625 mm to 2 mm, silt particles range from 0.002 mm to 0.0625 mm, and clay particles are smaller than 0.002 mm in size.
