0
A gagging tool is used on the water drum safety valves for the pressure setting. The safety valves are gagged one by one and the blow off presure is set for the other.
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Why is to safety valve mounted on boiler drum?
the safety valve is mounted on the top of drum because, if the water level in boiler decreases a certain value, the temperature gets increased in water drum because of lack of water. So, increase in temperature result in high pressure in steam drum, as the safety valve is designed to withstand a certain pressure, after a cetain pressure, the safety valve is removed by high pressure of steam. this is why the safety valve is mounted on top of boiler drum. +++ Shall we sort out that lot? That answer is wrong. Its only link with water-level is that the valve has to be above the water anyway. If the boiler runs dry the safety-valve will not protect it. The safety-valve is there to prevent the steam pressure rising to a potentially a dangerous level. It is set to open at the boiler's designed working pressure.
Which safety valve should be set to discharge at lower pressure drum safety valve or super heater safety vlave?
The Superheater safety valve must be the lowest set safety valve on any boiler, in order that flow through the superheater is maintained.If the drum valve were set lower the flow through the superheater would be disrupted on an overpressure.
What is meant by marcet boiler?
the apparatus ( Marcet Boiler ) consist a cylinder surrounded with isolated substance in it electrically heated boiler which is used to heat up water and to measure the both of the temperature and pressure, & it contains thermometer & barometer & safety valve .
How does marine boiler safety valves easing gear works?
assalamualaikum & peace be upon u all what i know is that a safety v\v easing gear is used to operate the safety valve manually, so when u lift up the easing gear handle it will press the spring surrounding the v\v spindle causing the valve to be opened up and allowing excess steam to be released so boiler pressure dropes..tq
What is a tricock valve?
It is a small, valve usually used to manually check if water is above the valve connection on a boiler or tank. There may be several of them at different heights on the boiler or tank. There is a handwheel on the valve, an inlet connection (which is attached to the boiler) and an outlet (usually left unconnected). When filling the boiler or tank, the try-cocks can be left open. Water coming from the try-cock means the tank is filled to at least that level. The valve is then closed.
What are the safety of boiler safety valve?
Safety valve simmering how can setting
Why two safety valve provide to boiler?
standby valve,
How do you test a safety valve of a Boiler?
Raise the pressure in the boiler until the valve relieves and note the pressure at which it does so.
Why is to safety valve mounted on boiler drum?
the safety valve is mounted on the top of drum because, if the water level in boiler decreases a certain value, the temperature gets increased in water drum because of lack of water. So, increase in temperature result in high pressure in steam drum, as the safety valve is designed to withstand a certain pressure, after a cetain pressure, the safety valve is removed by high pressure of steam. this is why the safety valve is mounted on top of boiler drum. +++ Shall we sort out that lot? That answer is wrong. Its only link with water-level is that the valve has to be above the water anyway. If the boiler runs dry the safety-valve will not protect it. The safety-valve is there to prevent the steam pressure rising to a potentially a dangerous level. It is set to open at the boiler's designed working pressure.
What is the highest pressure safety valve allowed on a low pressure boiler?
I believe that is 15 PSI on a low pressure steam boiler
How do set the lifting pressure of boiler safety valve?
The lifting pressure is set by turning the adjusting nut on top of the valve.
Which safety valve should be set to discharge at lower pressure drum safety valve or super heater safety vlave?
The Superheater safety valve must be the lowest set safety valve on any boiler, in order that flow through the superheater is maintained.If the drum valve were set lower the flow through the superheater would be disrupted on an overpressure.
Difference between boiler mountings and accessories?
Boiler mountings are different fittings and devices which are necessary for the operation and safety of a boiler .e.g. pressure gauge, safety valves , steam stop valve etc Normally these device are mounted over boiler shell .Boiler Accessories are auxilary plants or parts required for steam boilers for their proper operation and to increase efficiency of the boiler .e.g.feed pumps, super heater , economiser etc
What is the range of a safety valve settings for a boiler operation at 1000 psi?
There is no range on a safety valve. It lifts and relieves at whatever it`s setpoint is. As for the setpoint, it would be just above the maximum working pressure/temperature of the water side of the boiler as stated on the National Board Tag of the vessel.
On a high pressure boiler the pressure gauge could be graduated in?
2 times the pressure at which the safety valve is set.
What actions would be required if the safety valve was popping and the steam pressure indicated 30 psi on the boiler?
RUN!
Why does a boiler explode?
Low water level along with both a defective high limit safety and pressure relief valve.
