0
When there are impact loads on the springs, the stress propagates along the spring wire. The end coil of the spring in contact with the applied load takes up whole of the deflection and then it transmits a large part of its deflection to the adjacent coils. This wave of compression travels along the spring indefinitely. Resonance will occur depending upon time traveled.This results in very large deflections and correspondingly very high stresses. Under these conditions, it is just possible that the spring may fail. This phenomenon is called surge.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How eliminate surge phenomenon in spring?
Surge in springs is avoided by the following methods. (i) The spring is designed in such a way that the natural frequency of the spring is 15 to 20 times the frequency of excitation of the external force. This prevents the resonance condition to occur. (ii) The spring is provided with friction dampers on central coils. This prevents propagation of surge wave. (iii) A spring made of stranded wire reduces hte surge.
Which is the best robot in bots acclaim?
surge
What is surging in axial compressors?
Surge is defined as the operating point at which the compressor peak head capability and minimum flow limit are reached. The compressor loses the ability to maintain the peak head when surge occurs and the entire system becomes unstable. Under normal conditions, the compressor operates to the right of the surge line. However, as fluctuations in flow rate occur, or under startup / emergency shutdown, the operating point will move towards the surge line because flow is reduced. If conditions are such that the operating point approaches the surge line, the impeller and diffuser begin to operate in stall and flow recirculation occurs. The flow separation will eventually cause a decrease in the discharge pressure and flow from suction to discharge will resume. This is defined as the surge cycle of the compressor.The surge cycle will repeat itself unless control systems are installed or operational changes are made to bring the compressor out of the surge cycle. The surge cycle may result in a small or large flow reversal period depending on the discharge gas volume and the pressure ratio. Chronic surge is characterized by intermittent periods of small flow reversal that may not cause severe damage to the machine. Acute surge is more pronounced, usually due to a rapid transition across the surge line. Any surge event can cause severe damage to the thrust bearings, seals, and the impeller.
Can reciprocating compressor surge?
Compressor surge only occur in centrifugal compressors. reciprocating compressor don't as they increase pressure by volume reduction, unlike centrifugal compressors where they increase pressure by converting kinetic energy to potential energy (pressure).
What is compressor turndown?
Turndown: The allowable operating range for the centrifugal compressor between the design point and the surge line at any given speed for a fixed compressor head.
How eliminate surge phenomenon in spring?
Surge in springs is avoided by the following methods. (i) The spring is designed in such a way that the natural frequency of the spring is 15 to 20 times the frequency of excitation of the external force. This prevents the resonance condition to occur. (ii) The spring is provided with friction dampers on central coils. This prevents propagation of surge wave. (iii) A spring made of stranded wire reduces hte surge.
How can we avoid surge in springs?
Keep a steady pressure on the brakes. Do not release too soon when coming to a stop. Brake far in advance of a stop and increase your following distance.
Is surge a verb or an adjective?
Surge is a noun (a surge) and a verb (to surge). It is not an adjective.
How many surge commands in kingdom Birth by Sleep?
There are five: Payback Surge, Thunder Surge, Fire Surge, Barrier Surge, Vitality Surge.
What is the purpose of two or more valve springs in aircraft engines?
If only one spring were used on each valve, the valve would surge and bounce because of the natural vibration frequency of the spring.
What nicknames does Surge go by?
Surge goes by Surge Valdez, and Sergio Sebastian Valdez.
How do you spell surge and what does it mean?
"Surge" is spelled as S-U-R-G-E. It can mean a sudden powerful forward or upward movement, like a surge of waves or electricity. It can also refer to a sudden, rapid increase or rise in something, such as a surge in demand for a product or service.
What part of speech is surging?
Surge is a noun (a surge of anger) and a verb (to surge forward).
Can you not have a lh surge but have an estrogen surge?
Yes.
What is difference between surge absorber and surge suppressor?
There is likely no difference. Neither is accepted terminology for a surge suppressive device (SPD). If these products have been tested by safety organizations such as CSA (Canada) or UL (US) or tested to international surge standards (IEEE, IEC), then they should bare the correct terminology, otherwise, they are not tested to provide protection to equipment during a surge. Surge Absorber acts as a load that utilizes the high current until it exhausts. but the surge suppressor diverts the high current into ground without reaching the sensitive parts of the circuit. Surge absorber degrades faster than a surge suppressor.
What is the surge?
moving hydraulic jump is called as surge
How do you make surge?
You cant a surge is a natural thing.
