0
leg,toe,face,throat,root joint
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
What term refers to the center-to-center spacing of intermittent filet weld?
Pitch
What is definition of the under run in filet weld?
A fillet weld in any single continuous weldmay underrun the nominal fillet weld size specified by2 mm [1/16 in] without correction, provided that theundersize portion of the weld does not exceed 10% of thelength of the weld. On the web-to-flange welds on girders,underrun shall be prohibited at the ends for a lengthequal to twice the width of the flange.
What is girth weld?
circumfrencial weld is sometimes referred to as Girth weld. its just another term.
Can you weld steel to steel?
Yes, you can weld steel to steel. You can use steel welding rod.
What is a weld symbol?
A weld symbol is the shape drawn on a Print to tell the welder: how to prepare a welding joint, what process can be used to weld (mig, tig, arc, etc) what filler rod to use, how wide and long the weld should be, how to deal with the weld after your done (grind flush, brush clean, or nothing) and a million other things.... Its a tool that design engineers use to communicate what the weld needs to be to meet their design specifications.
What is pitch of a filet weld?
Pitch is center to center spacing of an intermittent weld.
How to do CONCAVE filet weld?
Eat a banana.
Leg or filet weld?
Leg of the weld. Fillet is the part you cut off e.g. a corner...
What parts of a filet weld are measured?
The distances from the root to the edges of the legs (toes) and the height of the crown are basic measurements. If the face is concave it might be considered.
What part of a filet weld that can be convex or concave?
The 'face' of the weld may be slightly convex, flat, or slightly concave.
What term refers to the center-to-center spacing of intermittent filet weld?
Pitch
What is the filet weld size required for weldolets to main pipe joint?
wildly welding main pipe the are fillet weld or butweld
What is the difference between Full-penetration butt welds and filet butt weld?
tell me full penetration joint process
What is definition of the under run in filet weld?
A fillet weld in any single continuous weldmay underrun the nominal fillet weld size specified by2 mm [1/16 in] without correction, provided that theundersize portion of the weld does not exceed 10% of thelength of the weld. On the web-to-flange welds on girders,underrun shall be prohibited at the ends for a lengthequal to twice the width of the flange.
How do you measure filet weld?
In a fillet weld, the leg and size are the same for the convex weld.
What does it mean by the crown of the weld?
The crown of the weld is the material of the filler metal that projects above the surface of the parts being joined by the weld.
Why is filet weld necessary while welding slip on flanges to a pipe end?
It is the only type of weld you can make to seal this type of joint. There are flange ends that can be welded onto pipe with a butt weld, but sockets and slip-ons must be fillet welded.
