The electric space heater. It's the only common machine that's 100% efficient.
Mechanical Efficiency is the ratio of Actual mechanical advantage to ideal mechanical advantage.Efficiency will be maximum when Actual mechanical advantage equals that of ideal.But practically not possible.Actual mechanical advantage will be less due to friction,heat,deflection etc.avoiding these loses will increase the machine efficiency.
how to calculate the embroidery machine capacity and Embroidery factory capacity and efficiency.
No. A perfectly frictionless machine could have an efficiency of 100%. Anything less perfect must have can efficiency less than 100%.
The efficiency is 80%. To find the efficiency, 400/500 = 80%.
Optimum Utilization of Machine means to use a Machine in such a way that we produce at the maximum capacity after spending its minimum maintenance and other variable cost. In Short, Higher Productivity in low Cost.
The condition for maximum efficiency of a d.c. machine is that VARIABLE LOSSES must be equal to CONSTANT LOSSES i.e., variable losses = constant losses..
Machine efficiency is typically determined by calculating the ratio of useful output to input. This can be done by comparing the actual output of the machine to its theoretical maximum output under ideal conditions. Factors such as energy losses, downtime, and maintenance can also affect machine efficiency.
The maximum efficiency of a machine is 100%, which means that all input energy is converted into useful output energy without any losses. However, achieving 100% efficiency is practically impossible due to factors such as friction, heat loss, and other inefficiencies in real-world systems.
In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.
No heat loss = maximum output. There would be no loss of energy, which is an ideal condition.
The plan was carefully orchestrated to insure success. He orchestrated every movement to get the maximum efficiency from the machine.
Mathematically, efficiency = (energy output) divided by (energy input) as a percentage. As if we couldn't figure this out for ourselves, one of the laws of Thermodynamics formally tells us "You can't get more energy out than what you put in." Applying this law to the formula for efficiency, it says that the maximum possible efficiency is 100%. However, the next law of Thermodynamics says "You can't even get that much out."
A high efficiency machine will produce more of what is it that you want with the same power as the low efficiency one. In other words, for a low efficiency machine do as much as a high efficiency one, you have to give it more power (energy).
the efficiency is maximum in a transformer when no load loss is equal to load loss.
The efficiency of a machine is usually expressed as a percentage. The ideal efficiency of a machine is 100-percent.Another AnswerThere are no units of measurement for efficiency, because you are comparing like with like: output power divided by input power.
It is always desirable to run any equipment or device at maximum efficiency for that matter, not only the power transformer. Power transformer maximum efficiency occurs when copper loss is equal to iron loss. (or no load loss equals to load loss). This does not necessariliy mean that maximum efficiency occurs at maximum or full load. Generally the maximum efficiency occurs at relatively less than full load of the transformer.
Mechanical Efficiency is the ratio of Actual mechanical advantage to ideal mechanical advantage.Efficiency will be maximum when Actual mechanical advantage equals that of ideal.But practically not possible.Actual mechanical advantage will be less due to friction,heat,deflection etc.avoiding these loses will increase the machine efficiency.