Mathematically, efficiency = (energy output) divided by (energy input) as a percentage. As if we couldn't figure this out for ourselves, one of the laws of Thermodynamics formally tells us "You can't get more energy out than what you put in." Applying this law to the formula for efficiency, it says that the maximum possible efficiency is 100%. However, the next law of Thermodynamics says "You can't even get that much out."
No machine has 100% efficiency. Because of friction and heat loss, this is impossible.
Less than 100%
A ficticious heat engine that works at the maximum theoretical efficiency is called a Carnot engine. Real engines, that obviously work at a lesser efficiency, include the combustion engines found in cars.A ficticious heat engine that works at the maximum theoretical efficiency is called a Carnot engine. Real engines, that obviously work at a lesser efficiency, include the combustion engines found in cars.A ficticious heat engine that works at the maximum theoretical efficiency is called a Carnot engine. Real engines, that obviously work at a lesser efficiency, include the combustion engines found in cars.A ficticious heat engine that works at the maximum theoretical efficiency is called a Carnot engine. Real engines, that obviously work at a lesser efficiency, include the combustion engines found in cars.
An ideal machine can reach 100% efficiency as there is no friction or other restraints involved, whereas a real machine can never reach 100% efficiency.
The efficiency of a machine is found by dividing the amount of work done by a machine by the amount of energy used by a machine. The answer is then multiplied by 100 to give a percentage.
Structural Efficiency= Maximum Mass Supported _______________________ (Divided By) Mass of Structure
Efficiency = useful output power / input power
In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.In any machine, some energy will usually be wasted. This will reduce the efficiency below the theoretical maximum of 1.0. However, please note that, if the efficiency is above 95% (or 0.95), when rounded to the nearest tenth you will get 1.0.
The condition for maximum efficiency of a d.c. machine is that VARIABLE LOSSES must be equal to CONSTANT LOSSES i.e., variable losses = constant losses..
The electric space heater. It's the only common machine that's 100% efficient.
Efficiency of any electrical machine is maximum when the load on that machine is such that the variable loss ( copper loss) is equal to constant loss (eddy current loss, hysteresis etc).the same applies to dc machines too.
No heat loss = maximum output. There would be no loss of energy, which is an ideal condition.
Because there is always going to be friction, the efficiency of any machine will always be less then 100 percent.
It is always desirable to run any equipment or device at maximum efficiency for that matter, not only the power transformer. Power transformer maximum efficiency occurs when copper loss is equal to iron loss. (or no load loss equals to load loss). This does not necessariliy mean that maximum efficiency occurs at maximum or full load. Generally the maximum efficiency occurs at relatively less than full load of the transformer.
The plan was carefully orchestrated to insure success. He orchestrated every movement to get the maximum efficiency from the machine.
A high efficiency machine will produce more of what is it that you want with the same power as the low efficiency one. In other words, for a low efficiency machine do as much as a high efficiency one, you have to give it more power (energy).
the efficiency is maximum in a transformer when no load loss is equal to load loss.
The efficiency of any machine is the output power divided by the input power, usually expressed as a percentage.
The efficiency of a machine is usually expressed as a percentage. The ideal efficiency of a machine is 100-percent.Another AnswerThere are no units of measurement for efficiency, because you are comparing like with like: output power divided by input power.