0.282-0.283 lb/in3
The density of high-tensile steel, such as the steel grade 8.8, typically ranges from 7,850 to 7,900 kilograms per cubic meter (kg/m³) or 7.85 to 7.90 grams per cubic centimeter (g/cm³). The density of steel can vary slightly depending on its composition and specific alloying elements. It's important to note that the density of steel is a property that can be influenced by factors such as temperature and processing conditions. The values provided here are general averages, and for precise engineering applications, it's advisable to use the specific density values provided by material suppliers or manufacturers.
7.7-8.03 (×1000 kg/m3) at 25 degrees Celsius.
The density of aluminized steel is 2710. Additionally, the density of its counterpart, carbon steel, is slightly different at 2833.
MATERIAL DENSITY (lb/in³)DENSITY (Kg/m³)Aluminum 11000.0982712.630661Aluminum 30030.0992740.310565Aluminum 50520.0972684.950756Aluminum 60610.0982712.630661Aluminum 70750.1012795.670375Aluminum, Cast, 3560.0972684.950756Aluminum, Cast, 3840.1022823.350279Beryllium0.06751868.393567Beryllium Copper0.2988248.611601Brass, Cartridge0.3088525.410648Brass, Free Cutting0.3078497.730743Brass, Naval0.3048414.691029Brass, Red0.3168746.849885Cast Iron, Grey, CL350.2526975.335984Chromium0.267196.775222Copper OFHC0.3238940.609218Gold, (99.95)0.68218877.69501Iron, Pure0.2847861.092935Kovar0.3028359.331219Lead0.4111348.76093Magnesium0.0631743.833996Magnesium, Cast, AZ91A0.0661826.87371Manganese0.2677390.534555Molybdenum0.36910213.88483Nickel, Pure0.3098553.090552Phosphor Bronze0.328857.569504Platinum, (99.9)0.77521451.92614Silver, Fine0.37910490.68388Stainless Steel 3010.2857888.77284Stainless Steel 3020.2847861.092935Stainless Steel 3040.2897999.492458Stainless Steel 3160.2847861.092935Stainless Steel 4200.2787695.013507Stainless Steel 4300.2837833.41303Stainless Steel 4400.2797722.693411Steel, Carbon Alloy0.2847861.092935Steel, Mild0.2847861.092935Tin0.2647307.494841Titanium0.1634511.824466Tungsten0.69719292.89358Zinc0.2587141.415413Zinc, Cast0.246643.177128Zirconium0.236366.378081
It will be at least 117,000 psi and as high as 290,000 psi - the range depends on the tempering temperature and heat treat
EH 36
It's a misnomer. 4140 is a type of steel, which is NOT stainless.
Density of SS400 grade steel is 7860 kg/m3Refer to the related link for other properties.
The density of austenitic steel varies according to the type or grade. For one of the commonly used austenitic steel like Type 304, the density is 8.0g/cm3.
7,7~8,03 g/cm³
The Density of Low Grade SteelThe density of low grade steel is on the order of 7850 kg/m3, 78.5 kN/m3, 7.85 g/cc or 0.2836 lb/in3.
7,850 × 10-9 kg/mm3 [44]
The density of high-tensile steel, such as the steel grade 8.8, typically ranges from 7,850 to 7,900 kilograms per cubic meter (kg/m³) or 7.85 to 7.90 grams per cubic centimeter (g/cm³). The density of steel can vary slightly depending on its composition and specific alloying elements. It's important to note that the density of steel is a property that can be influenced by factors such as temperature and processing conditions. The values provided here are general averages, and for precise engineering applications, it's advisable to use the specific density values provided by material suppliers or manufacturers.
Iron has a density of approximately 7.86g/cm3. Nails are not usually made from pure iron, but from soft steel, a mixture of iron and carbon. The density, however, is pretty much the same depending on the grade of steel used.
The answer depends on the grade of the steel, but 7.85 g/cm3 is generally accepted for plain steel. If the steel has added alloying elements such as tungsten, then it can be as high as 8.05 g/cm3
Steel has the greatest density of the three.
This grade of the steel is 7.85 grade which is of the premium grade available for a microwave.