A turbine is a device that converts fluid energy (such as from water, steam, or gas) into mechanical energy, typically to generate electricity or power machinery. In contrast, a motor converts electrical energy into mechanical energy, usually to drive machinery or vehicles. While both devices produce rotational motion, turbines primarily harness energy from a moving fluid, whereas motors rely on electrical power to create motion.
voloute convord the pressure into volicity and the mixtur of propallere and impeller is called turbine pump
1- it is amatter of preference 2- considered under gyroscopic precession
pelton turbine is used for high head low flow but the turgo turbine is used for low head high flow, in pelton turbine number of jet can increased but in turgo it can't be done, in pelton the water hits the bucket once at a time but in tugo it hits more than one
The Emergency Stop Valve (ESV) in a turbine is placed between the steam engine and the turbine structure. It is designed to rapidly close and prevent steam from reaching the turbine in case of emergency.
Firstly, vacuum is being created in turbine exhaust and condenser rather than being required. It is created to reduce the back-pressures and to improve the turbine efficiency. Also, with vacuum the designers can design large size last stage blades of LP turbine for maximizing the turbine output.
the machine is the one that operates or makes the turbine work. the machine is the one that operates or makes the turbine work.
both are same using for rotating the turbine initially
RADITOR * Small generators either air cooled or water cooled 2 stroke. Autos are mainly 4 stroke and the majority watercooled.
There is no difference between the term "motor ship" and the term "motor vessel." The two are commonly used interchangeably.
it is difference between the water level from head race and tail race
difference of motor and marine insurance
Main difference is that in a gas turbine, combustion is continuous. In a piston engine, combustion is pulsed.
in a radial flow turbine the steam enters the turbine in the direction of its radius and leaves it in the direction of the axis of the shaft. in a axial flow turbine the steam enters the turbine in the direction of the axis of the shaft and leaves the turbine in the same direction.
no you can't use dc motor to power hydro turbine ?
Both
voloute convord the pressure into volicity and the mixtur of propallere and impeller is called turbine pump
The main difference between a motor tic and compulsion is that one is that a motor tic is involuntary and a compulsion is not. A compulsion is more of a learned or hereditary behavior.