Originally from when Briggs & Stratton started business in 1919, the engine's were built in Milwaukee Wisconsin to 1985 and well into the 1990's. Recently great production is very little from were Briggs & Stratton was originally started. These day's there is great activity of Briggs & Stratton parts from China/Japan and Briggs & Stratton engine blocks being casted in Mexico. Truley a great devistation to a once GREAT engine. Which is why alot of people like myself will no longer recommend a Briggs & Stratton engine. Today your best bet is Kohler (still U.S. produced), Kawasaki or Honda.
Get the model # and click the link I will post.
Head Bolts should be torqued at 185 inch pounds
Briggs and Stratton does not release specific compression values. Anything above 120 psi should be just fine, around 90-100 and you're most likely due for a rebuild. A better test is a leakdown test, with can help in determining where compression is being lost.
For a 20 HP twin Briggs & Stratton engine, the valve specifications typically include a valve clearance of around 0.005 to 0.007 inches for the intake and 0.007 to 0.009 inches for the exhaust valves when cold. The engine usually features a flathead or overhead valve design, with both intake and exhaust valves made from durable materials to withstand high temperatures. Specific dimensions and tolerances can vary by model, so it's essential to refer to the engine's service manual for precise specifications.
Click the link and find your engine for the exact capacity.
0.030 is the gap for briggs and stratton 4.5 hp mower
You can get that info on the Briggs and Stratton website. Just go to: http://www.ereplacementparts.com/briggs-and-stratton-parts-c-16758.html?gclid=CPCZj4vGr58CFZdM5Qodp3bDsA and enter your engine model number.
Where is the location of the idle screw on the Briggs and Stratton 6.0 engine mulcher mower?
Kohler for sure
The 15.5 Briggs does not have an oil filter.
If the first two digits of the engine's model number are the same, the answer is yes.
Briggs & Stratton part # 491056 NAPA filter # 1348
How do I change points to electronic ignition on a 5 hp briggs & stratton small engine?
what plug size fits a 3.75 briggs and stratton,and a 19.5 briggs engine and what is the gap. thank you
NO
under the flywheel