0
What else can I help you with?
Why extraction taken from steam turbine?
Why extractions are taken out from steam turbine.
What is difference bw condensing and non condensing steam turbines?
A condensing turbine uses all the energy from the steam going from high pressure turbine to secondary turbine to condensing turbine then sends the condensate back for reheating. where a non condensing turbine just uses the high pressure aspect of the steam then returns the low pressure stream back to be reheated. Condensng turbines utilises the entire available drop from high pressure to the vacuum in the condenser; a back pressure turbine only utilises only the top part, whereas an exhaust steam turbine utilises only th bottom part of the pressure drop. Hope that helps.
What type of cycle used in steam turbine?
Rankine cycle is used in steam turbine
Nozzle clearance how to steam turbine?
Steam turbine nozzle clearance is the total energy content available in steam. This is through a valve.
What causes steam turbine governor hunting?
inconsistent load will cause steam turbine hunting.
How did the steam boat work?
A steam boat uses superheated water (steam) to turn a turbine. This turning turbine thereby is connected to a engine that uses mechanical means to turn a propeller.
What is a kind of engine that uses water steam or heat that starts with tur?
The word is "turbine".
What uses mechanical energy?
A power station generator uses mechanical energy produced by the steam turbine.
Lube oil has three uses what are they in a steam turbine?
1. For lubrication the bearings 2. For controlling the turbine 3. For sealing
A kind of engine which uses water steam or heat that starts with tur?
Turbine.
What is a word that starts with tur that means a engine that uses water steam or heat?
Turbine
What is a steam turbine?
It is an engine.A steam turbine is a heat engine that uses the expansion of steam passing through stationary nozzles and blades on a shaft to turn the shaft. The steam can move through the turbine axially (one end of shaft to the other end), radially (shaft to outer casing), or tangentially (around the outer edges of the turbine wheel). In an impulse turbine, the steam is expanded in nozzles and pushes the blades. In a reaction turbine the steam is expanded in the nozzles AND in the blades, the reaction of the expansion of the steam pushes away from the blades spinning the wheel in the process. The expansion of the steam is necessary to increase its velocity through the turbine.
How does a steam engine differ from a steam turbine?
Technically a steam turbine is a particular type of steam engine. A classic steam engine usually refers to a reciprocating steam engine, which uses a piston and crank arrangement, where pressurised steam (from the boiler) forces the piston through its stroke, producing output power. A steam turbine produces power with pressurized steam expanding to high velocity, and impinging on turbine blades which produce rotational output power. A steam turbine can be considered similar to a windmill, although steam turbines typicaly rotate much faster, and often have many stages of steam expansion within a single machine.
Uses of heat?
Heat from nuclear energy is used to produce steam to drive a turbine/generator
Why extraction taken from steam turbine?
Why extractions are taken out from steam turbine.
What is difference between a geothermal and thermal power plant?
The steam turbine blades to turn creates steam.The steam engine, steam piston Myllng after the turn brings.+++They are both steam-engines. The turbine is purely rotative; the reciprocating steam-engine uses cylinders and pistons.
What is difference bw condensing and non condensing steam turbines?
A condensing turbine uses all the energy from the steam going from high pressure turbine to secondary turbine to condensing turbine then sends the condensate back for reheating. where a non condensing turbine just uses the high pressure aspect of the steam then returns the low pressure stream back to be reheated. Condensng turbines utilises the entire available drop from high pressure to the vacuum in the condenser; a back pressure turbine only utilises only the top part, whereas an exhaust steam turbine utilises only th bottom part of the pressure drop. Hope that helps.
