0
When ever a part or material experiences a large amount of stress there will be some form of deformation. The part or material will return back to its physical shape it was in before it was stressed. If the stress on the part or material exceeds it's yield strength then it will forever alter the physical characters of the body in question (It will forever change the shape of the material because it has been strectched too far to return back to normal).
What else can I help you with?
What is the yield strength of plywood?
Yield strength - 13.8 MPa Ultimate tensile strength - 31 MPa
What are DSS Pipes?
Duplex Stainless Steel pipes are using when the corrosion allowance is exceed the limit to do Stainless Steel pipes. The maximum corrosion allowance allowed in a Design life (7000 cycle / 20 years) is 3 or 6 mm. This having a high yield strength than the S.S pipes
What is yield strength and tensile strength of 20c8 cast steel?
YIELD STRENGTH 242 N/sqmm TENSILE STRENGTH 440~520 N/sqmm
Is yield strength and proof stress same?
Yes it is the same. Offset Yield strength = 0.2% Proof Stress
What is yield strength of st52.3?
520 Mpa
What is the endurance limit for cold roled steel?
0.5 of the yield strength.
Can the Yield strength of steel ever be greater than the Ultimate tensile strength?
The yield strength is reached when the material becomes non - linear ( that is non elastic) and takes a permanent set when load is released. Material stretches but does not break. Ultimate strength is when it breaks and is higher than yield strength.
What is the difference between the elastic limit and yield strength in materials testing?
The elastic limit is the point at which a material can be deformed and return to its original shape when the force is removed. Yield strength is the point at which a material starts to deform permanently. In other words, the elastic limit is the maximum stress a material can withstand without permanent deformation, while the yield strength is the stress at which a material begins to deform permanently.
Will the yield on a 2 year corporate bond exceed the yield on a 2 year treasury bond?
The yield on a 2 year corporate bond will always exceed the yield on a 2 year treasury bond
The yield on a 2 year corporate bond will always exceed the yield on a 2 year treasury bond?
The yield on a 2 year corporate bond will always exceed the yield on a 2 year treasury bond
Does a yield treasure bond exceed the yield on a coperate bond?
Which of the following is most correct?a. The yield on a 2 year corporate bond will always exceed the yield on a 2 year treasury bond.b. The yield on a 3 year corporate bond will always exceed the yield on a 2 year corporate bond.c. The yield on a 3 year treasury bond will always exceed the year on a 2 year treasury bond.d. All of the answers above are correct.e. Statements a and c are correct.
Which one is greater yield strength or breaking strength?
The breaking strength is always greater than the yield strength.
What is the yield strength of plywood?
Yield strength - 13.8 MPa Ultimate tensile strength - 31 MPa
What is difference between the proportional limit and the yield point of a string that has been over stretched?
proportional limit is value of stress that beyond which it is nonlinear; prior to that the stress strain diagram is a straight line. At yield, the material strain will not return to zero after unloading and have a permanent set
What is Characteristic yield strength of steel in terms of minimum yield stress and percent proof stress?
what is characteristic yield strength
What is the root word of exceed?
The root word of exceed is "cede" which means "to go, yield, or surrender".
What is difference between limit of proportionality and tensile strength?
The proportional limit is the stress value at which the stress is no longer linear with strain. After that, the material will begin to yield and become non-linear, or plastic, and then it will fail at a higher value called the tensile strength. For most metals, the proportional limit is well below the tensile strength; for example annealed stainless steel has a proportional limit near 30 ksi and tensile strength of 80 ksi; aluminum has a proportional limit of 35 ksi and tensile strength of 42 ksi.
