Smaller number is thicker metal.
Between 6 and 7 gauge. 6 is thicker at .194 inch. 7 is thinner at .179 inch.
Probably 25 gauge, which is .556 mm thick. However, 26 gauge is close too, it is .478 mm thick.
For ferrous sheets, gauge 24 ------> 0.607 mm For non-ferrous sheets, gauge 24 ------> 0.511 mm Source: Table A-28 (Shigley's Mechanical Engineering Design, Special Indian Edition. Richard G. Budynas, J. Keith Nisbett. 9th edition)
16 gauge pipe refers to the wall thickness of the pipe exclusive of its diameter.It is 0.064 inches thick, this is a steel wire gauge measurement.Pipes are typically sold by schedule numbers. A wall thickness of 0.064 inches would correspond to pipe schedule 40 for 1/8" diameter pipe (0.068"), schedule 10 for 1/4" and 3/8" pipe (0.065") and schedule 5 for pipe diameters 1/2" to 2" (0.065"). Over 2" diameter pipe, schedule 5 (the smallest wall thickness) is thicker than 16 gauge steel.
what is thicker 26 or 2w9 guage
Yes it is.
16 gauge is thicker. The lower the number the thicker the materiel.
12 gauge is thicker than 20 gauge. The lower the gauge, the thicker the sheet metal or wire.
20 gauge is thicker (the lower the number, the thicker the steel).
7 gauge is the lower the number the thicker the gauge.
The 12-gauge is thicker.
Yes, much thicker.
10 GA vinyl is thicker than 6GA vinyl. The higher the gauge the thicker the vinyl.
Smaller number is thicker metal.
8.8 is thicker
The thickness of metal wire is inversely proportional to the guage number of the metal wire. So 28 guage metal wire is thicker than 30 guage metal wire.